The data-lanes are a property of the out remote endpoint, so move them from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to mdss_dp3_out and make sure to include all frequencies. Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index d4198fa204fd..c5c2895b37c7 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -599,8 +599,6 @@ &mdss_dp3 { compatible = "qcom,x1e80100-dp"; /delete-property/ #sound-dai-cells; - data-lanes = <0 1 2 3>; - status = "okay"; aux-bus { @@ -620,6 +618,9 @@ ports { port@1 { reg = <1>; mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&edp_panel_in>; }; }; -- 2.34.1