Re: [PATCH v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 19 Apr 2024 at 08:31, Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On Fri, 19 Apr 2024 at 18:27, Sumit Garg <sumit.garg@xxxxxxxxxx> wrote:
> >
> > On Tue, 9 Apr 2024 at 23:24, Sumit Garg <sumit.garg@xxxxxxxxxx> wrote:
> > >
> > > Hi Bjorn, Konrad,
> > >
> > > On Wed, 3 Apr 2024 at 10:04, Sumit Garg <sumit.garg@xxxxxxxxxx> wrote:
> > > >
> > > > Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge
> > > > Box Core board based on the Qualcomm APQ8016E SoC. For more information
> > > > refer to the product page [1].
> > > >
> > > > One of the major difference from db410c is serial port where HMIBSC board
> > > > uses UART1 as the debug console with a default RS232 mode (UART1 mode mux
> > > > configured via gpio99 and gpio100).
> > > >
> > > > Support for Schneider Electric HMIBSC. Features:
> > > > - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
> > > > - 1GiB RAM
> > > > - 8GiB eMMC, SD slot
> > > > - WiFi and Bluetooth
> > > > - 2x Host, 1x Device USB port
> > > > - HDMI
> > > > - Discrete TPM2 chip over SPI
> > > > - USB ethernet adaptors (soldered)
> > > >
> > > > This series is a v2 since v1 of this DTS file has been reviewed on the
> > > > U-Boot mailing list [2].
> > > >
> > > > Changes in v5:
> > > > - Addressed another nitpick from Stephen.
> > > > - Collected Stephen's review tag.
> > > > - Warnings reported by Rob's DT check bot aren't related to HMIBSC
> > > >   board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt
> > > >   still not converted to YAML format.
> > > >
> > >
> > > I haven't seen any further comments on this series, can you help to pick it up?
> >
> > Gentle reminder.
>
> I see an email from Rob. At least GPIO-related warnings are related to HMIBSC
>

I suppose you are referring to:

arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb: pmic@0:
gpio@c000:gpio-line-names: ['USB_HUB_RESET_N_PM', 'USB_SW_SEL_PM',
'NC', 'NC'] is too short
from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb: gpio@c000:
gpio-line-names: ['USB_HUB_RESET_N_PM', 'USB_SW_SEL_PM', 'NC', 'NC']
is too short
from schema $id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#

I am really not sure as to why those warnings are being reported for
v5 and not reported for v4 here [1]. Also, there are only 4 PMIC GPIOs
available on PM8916 out of which only 2 are connected on HMIBSC and
the other 2 are not connected. AFAICT, these seem to be false warning
reports or am I missing something?

[1] https://lore.kernel.org/lkml/171155390164.3454213.14779164019451021567.robh@xxxxxxxxxx/

-Sumit

>
> --
> With best wishes
> Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux