Hi Kamel, thank you for the patch. Again just a rough review. On 24-04-19, Kamel Bouhara wrote: > Add a new driver for the TouchNetix's axiom family of > touchscreen controllers. This driver only supports i2c > and can be later adapted for SPI and USB support. > > Signed-off-by: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx> > --- ... > +static int axiom_i2c_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct input_dev *input_dev; > + struct axiom_data *ts; > + u32 poll_interval; > + int target; > + int error; > + > + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); > + if (!ts) > + return -ENOMEM; > + > + i2c_set_clientdata(client, ts); > + ts->client = client; > + ts->dev = dev; > + > + ts->regmap = devm_regmap_init_i2c(client, &axiom_i2c_regmap_config); > + error = PTR_ERR_OR_ZERO(ts->regmap); > + if (error) { > + dev_err(dev, "Failed to initialize regmap: %d\n", error); > + return error; > + } > + > + ts->vddi = devm_regulator_get(dev, "VDDI"); This does not match the dt-bindings. > + if (IS_ERR(ts->vddi)) > + return dev_err_probe(&client->dev, PTR_ERR(ts->vddi), > + "Failed to enable VDDI regulator\n"); > + > + ts->vdda = devm_regulator_get(dev, "VDDA"); Here as well. > + if (IS_ERR(ts->vdda)) > + return dev_err_probe(&client->dev, PTR_ERR(ts->vdda), > + "Failed to enable VDDA regulator\n"); Now we handle it as always but.. > + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(ts->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(ts->reset_gpio), "failed to get reset GPIO\n"); > + > + if (ts->reset_gpio) > + axiom_reset(ts->reset_gpio); > + else > + msleep(AXIOM_STARTUP_TIME_MS); still the reset is useless since you never enabled the regulators. So either use devm_regulator_get_enable() or you do the enable/disable separate via regulator_enable()/disable(). If there are no strict enablement restrictions like orders and timings you could also make use of the regulator_bulk API (e.g. devm_regulator_bulk_get_enable). Regards, Marco > + > + error = axiom_discover(ts); > + if (error) > + return dev_err_probe(dev, error, "Failed touchscreen discover\n"); > + > + input_dev = devm_input_allocate_device(ts->dev); > + if (!input_dev) > + return -ENOMEM; > + > + input_dev->name = "TouchNetix axiom Touchscreen"; > + input_dev->phys = "input/axiom_ts"; > + > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); > + > + touchscreen_parse_properties(input_dev, true, &ts->prop); > + > + /* Registers the axiom device as a touchscreen instead of a mouse pointer */ > + error = input_mt_init_slots(input_dev, AXIOM_U41_MAX_TARGETS, INPUT_MT_DIRECT); > + if (error) > + return error; > + > + /* Enables the raw data for up to 4 force channels to be sent to the input subsystem */ > + set_bit(EV_REL, input_dev->evbit); > + set_bit(EV_MSC, input_dev->evbit); > + /* Declare that we support "RAW" Miscellaneous events */ > + set_bit(MSC_RAW, input_dev->mscbit); > + > + ts->input_dev = input_dev; > + input_set_drvdata(ts->input_dev, ts); > + > + /* Ensure that all reports are initialised to not be present. */ > + for (target = 0; target < AXIOM_U41_MAX_TARGETS; target++) > + ts->targets[target].state = AXIOM_TARGET_STATE_NOT_PRESENT; > + > + error = devm_request_threaded_irq(dev, client->irq, NULL, > + axiom_irq, IRQF_ONESHOT, dev_name(dev), ts); > + if (error) { > + dev_info(dev, "Request irq failed, falling back to polling mode"); > + > + error = input_setup_polling(input_dev, axiom_i2c_poll); > + if (error) > + return dev_err_probe(ts->dev, error, "Unable to set up polling mode\n"); > + > + if (!device_property_read_u32(ts->dev, "poll-interval", &poll_interval)) > + input_set_poll_interval(input_dev, poll_interval); > + else > + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS); > + } > + > + return input_register_device(input_dev); > +} > + > +static const struct i2c_device_id axiom_i2c_id_table[] = { > + { "ax54a" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); > + > +static const struct of_device_id axiom_i2c_of_match[] = { > + { .compatible = "touchnetix,ax54a", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, axiom_i2c_of_match); > + > +static struct i2c_driver axiom_i2c_driver = { > + .driver = { > + .name = "axiom", > + .of_match_table = axiom_i2c_of_match, > + }, > + .id_table = axiom_i2c_id_table, > + .probe = axiom_i2c_probe, > +}; > +module_i2c_driver(axiom_i2c_driver); > + > +MODULE_AUTHOR("Bart Prescott <bartp@xxxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Pedro Torruella <pedro.torruella@xxxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Mark Satterthwaite <mark.satterthwaite@xxxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Hannah Rossiter <hannah.rossiter@xxxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>"); > +MODULE_DESCRIPTION("TouchNetix axiom touchscreen I2C bus driver"); > +MODULE_LICENSE("GPL"); > -- > 2.25.1 > >