From: Wei Fang <wei.fang@xxxxxxx> Both the PHYs of the EQOS interface and the FEC interface are supported to be reset by I2C GPIO Expender. So add the support to reset PHYs. Signed-off-by: Wei Fang <wei.fang@xxxxxxx> Reviewed-by: Clark Wang <xiaoning.wang@xxxxxxx> Signed-off-by: Peng Fan <peng.fan@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index b29d470d2492..44ae985945ad 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -121,6 +121,9 @@ mdio { ethphy1: ethernet-phy@1 { reg = <1>; eee-broken-1000t; + reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; }; }; }; @@ -142,6 +145,9 @@ mdio { ethphy2: ethernet-phy@2 { reg = <2>; eee-broken-1000t; + reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; }; }; }; -- 2.37.1