In the ethernet stmmac device driver: - drivers/net/ethernet/stmicro/stmmac/ The "Strict priority" for the tx scheduler is by default in Linux driver, so the tx-sched-sp property was removed in commit aed6864035b1 ("net: stmmac: platform: Delete a redundant condition branch"). This patch series remove this property from the following device-tree files: - arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi - arch/arm64/boot/dts/freescale/imx8mp-evk.dts - arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi - arch/arm64/boot/dts/qcom/sa8540p-ride.dts - arch/arm64/boot/dts/qcom/sa8775p-ride.dts There is no problem if that property is still used in these DTS, since, as seen above, it is a default property of the driver. The property is also removed, in a separate patch, from the corresponding dt_bindings file: - Documentation/devicetree/bindings/net/snps,dwmac.yaml v2 - This patch is the 2nd version of a previous patch, where both the DTS and the yaml files were included toghether. Then I split this 1st patch in two, as suggested by Krzysztof. v1 - original version of the patch where, in addition to these DTS patches, there was also the one related to the correspondent snps,dwmac.yaml dt_binding file. Flavio Suligoi (5): arm64: dts: freescale: imx8mp-beacon: remove tx-sched-sp property arm64: dts: freescale: imx8mp-evk: remove tx-sched-sp property arm64: dts: freescale: imx8mp-verdin: remove tx-sched-sp property arm64: dts: qcom: sa8540p-ride: remove tx-sched-sp property arm64: dts: qcom: sa8775p-ride: remove tx-sched-sp property arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 1 - arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 1 - arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 2 -- arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 2 -- 5 files changed, 7 deletions(-) -- 2.34.1