The data-lanes are a property of the out remote endpoint, so move them
from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
mdss_dp3_out and make sure to include all frequencies.
Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 35580ac3430d..2061fbe7b75a 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -410,8 +410,6 @@ &mdss_dp3 {
compatible = "qcom,x1e80100-dp";
/delete-property/ #sound-dai-cells;
- data-lanes = <0 1 2 3>;
-
status = "okay";
aux-bus {
@@ -431,6 +429,9 @@ ports {
port@1 {
reg = <1>;
mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
remote-endpoint = <&edp_panel_in>;
};
};
--
2.34.1
