On Wed, 17 Apr 2024 at 15:11, Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> wrote: > > Enable the ADSP, CDSP, MPSS and WPSS that are found on the SoC. > > Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > index f8f8a43f638d..01ea64b16969 100644 > --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > @@ -580,6 +580,26 @@ &qupv3_id_0 { > status = "okay"; > }; > > +&remoteproc_adsp { > + firmware-name = "qcom/qcm6490/adsp.mbn"; Is there a difference between qcm6490 and qcs6490 firmware files? If there is none, can we use the existing paths? I assume that modem is the only difference there. In such a case, please use "modem_nm.mbn" for the not-modem mpss and plain "modem.mbn" for the standard one. > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/qcm6490/cdsp.mbn"; > + status = "okay"; > +}; > + > +&remoteproc_mpss { > + firmware-name = "qcom/qcm6490/modem.mbn"; > + status = "okay"; > +}; > + > +&remoteproc_wpss { > + firmware-name = "qcom/qcm6490/wpss.mbn"; > + status = "okay"; > +}; > + > &sdhc_1 { > non-removable; > no-sd; > -- > 2.42.0 > > -- With best wishes Dmitry