This series aims to add support for Rockchip RK816 PMIC series. As per
datasheet it's targeted for RK3126/RK3128 (RK816-1), RK1108 (RK816-2) and
PX3-SE (RK816-3) but might be used for other SoCs as well. The MFD consists
of an integrated RTC, a GPIO controller, two 32k clock outputs, a power
key, 3 buck- and 6 ldo regulators, 3 regulator-switches, and charger with
integrated fuel gauge. Charger and fuel gauge are not part of this series.
Two of the switches (otg/boost) are part of the binding, but not of
the driver. They must only ever be enabled if no battery charging is
happening, but it will be enabled automatically if a battery is attached
and an external power source is connected. Thus that needs some
incorporation of a yet to be added charger driver.
Integration in the existing rk8xx-infrastructure was pretty straightforward
and only needed very little tweaking. In order to not further bloat the
driver(s) too much with additional `#define`s I tried to re-use existing
ones wherever possible.
The patches are loosely based on the vendor's implementation, verified
against the datasheet and tested/measured on a RK3126 board.
I'd like to gently ping pinctrl and regulator maintainers: please have a
look at this series. I've now added Sebastian Reichel to the recipients, as
he recently added RK806 support and re-worked parts of the rk8xx drivers.
changes since v1:
- integrated Krzysztof's feedback for the bindings and the resulting
driver changes
- fixed a sparse warning
link to v1:
https://lore.kernel.org/lkml/20240321143911.90210-2-knaerzche@xxxxxxxxx/
changes since v2:
- integrated Krzysztof's feedback to v2 of the bindings and the resulting
driver changes
link to v2:
https://lore.kernel.org/lkml/20240323085852.116756-1-knaerzche@xxxxxxxxx/
changes since v3:
- integrated Krzysztof's feedback to the bindings of v3
- integrated Lee's feedback to the mfd part of v3
link to v3:
https://lore.kernel.org/lkml/20240323132757.141861-2-knaerzche@xxxxxxxxx/
Please see individual patches for details about the changes.
Alex Bee (5):
dt-bindings: mfd: Add rk816 binding
mfd: rk8xx: Add RK816 support
pinctrl: rk805: Add rk816 pinctrl support
regulator: rk808: Support apply_bit for
rk808_set_suspend_voltage_range
regulator: rk808: Add RK816 support
.../bindings/mfd/rockchip,rk816.yaml | 274 ++++++++++++++++++
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk8xx-core.c | 104 +++++++
drivers/mfd/rk8xx-i2c.c | 45 ++-
drivers/pinctrl/pinctrl-rk805.c | 69 +++++
drivers/regulator/rk808-regulator.c | 218 +++++++++++++-
include/linux/mfd/rk808.h | 144 +++++++++
7 files changed, 851 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml
--
2.43.2
