[PATCH v3 2/2] pwm: Add Loongson PWM controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit adds a generic PWM framework driver for the PWM controller
found on Loongson family chips.

Co-developed-by: Juxin Gao <gaojuxin@xxxxxxxxxxx>
Signed-off-by: Juxin Gao <gaojuxin@xxxxxxxxxxx>
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
 MAINTAINERS                |   1 +
 drivers/pwm/Kconfig        |  10 ++
 drivers/pwm/Makefile       |   1 +
 drivers/pwm/pwm-loongson.c | 298 +++++++++++++++++++++++++++++++++++++
 4 files changed, 310 insertions(+)
 create mode 100644 drivers/pwm/pwm-loongson.c

diff --git a/MAINTAINERS b/MAINTAINERS
index ecef2744726d..d32da7c77f0e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12756,6 +12756,7 @@ M:	Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
 L:	linux-pwm@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	Documentation/devicetree/bindings/pwm/loongson,ls7a-pwm.yaml
+F:	drivers/pwm/pwm-loongson.c
 
 LOONGSON-2 SOC SERIES CLOCK DRIVER
 M:	Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 4b956d661755..bb163c65e5ae 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -324,6 +324,16 @@ config PWM_KEEMBAY
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-keembay.
 
+config PWM_LOONGSON
+	tristate "Loongson PWM support"
+	depends on MACH_LOONGSON64
+	help
+	  Generic PWM framework driver for Loongson family.
+	  It can be found on Loongson-2K series cpu and Loongson LS7A bridge chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-loongson.
+
 config PWM_LP3943
 	tristate "TI/National Semiconductor LP3943 PWM support"
 	depends on MFD_LP3943
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index c5ec9e168ee7..bffa49500277 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_PWM_INTEL_LGM)	+= pwm-intel-lgm.o
 obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
 obj-$(CONFIG_PWM_KEEMBAY)	+= pwm-keembay.o
+obj-$(CONFIG_PWM_LOONGSON)	+= pwm-loongson.o
 obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
 obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o
 obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o
diff --git a/drivers/pwm/pwm-loongson.c b/drivers/pwm/pwm-loongson.c
new file mode 100644
index 000000000000..5ac79a69acd3
--- /dev/null
+++ b/drivers/pwm/pwm-loongson.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Loongson PWM driver
+ *
+ * Author: Juxin Gao <gaojuxin@xxxxxxxxxxx>
+ * Further cleanup and restructuring by:
+ *         Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
+ *
+ * Copyright (C) 2017-2024 Loongson Technology Corporation Limited.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/units.h>
+
+/* Loongson PWM registers */
+#define PWM_DUTY	0x4 /* Low Pulse Buffer Register */
+#define PWM_PERIOD	0x8 /* Pulse Period Buffer Register */
+#define PWM_CTRL	0xc /* Control Register */
+
+/* Control register bits */
+#define PWM_CTRL_EN	BIT(0)  /* Counter Enable Bit */
+#define PWM_CTRL_OE	BIT(3)  /* Pulse Output Enable Control Bit, Valid Low */
+#define PWM_CTRL_SINGLE	BIT(4)  /* Single Pulse Control Bit */
+#define PWM_CTRL_INTE	BIT(5)  /* Interrupt Enable Bit */
+#define PWM_CTRL_INT	BIT(6)  /* Interrupt Bit */
+#define PWM_CTRL_RST	BIT(7)  /* Counter Reset Bit */
+#define PWM_CTRL_CAPTE	BIT(8)  /* Measurement Pulse Enable Bit */
+#define PWM_CTRL_INVERT	BIT(9)  /* Output flip-flop Enable Bit */
+#define PWM_CTRL_DZONE	BIT(10) /* Anti-dead Zone Enable Bit */
+
+#define PWM_FREQ_STD       (50 * HZ_PER_KHZ)
+
+struct pwm_loongson_ddata {
+	struct pwm_chip	chip;
+	struct clk	*clk;
+	void __iomem	*base;
+	/* The following for PM */
+	u32		ctrl;
+	u32		duty;
+	u32		period;
+};
+
+static inline struct pwm_loongson_ddata *to_pwm_loongson_ddata(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pwm_loongson_ddata, chip);
+}
+
+static inline u32 pwm_loongson_readl(struct pwm_loongson_ddata *ddata, u64 offset)
+{
+	return readl(ddata->base + offset);
+}
+
+static inline void pwm_loongson_writel(struct pwm_loongson_ddata *ddata,
+				       u32 val, u64 offset)
+{
+	writel(val, ddata->base + offset);
+}
+
+static int pwm_loongson_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				     enum pwm_polarity polarity)
+{
+	struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
+	u16 val;
+
+	val = pwm_loongson_readl(ddata, PWM_CTRL);
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		/* Duty cycle defines LOW period of PWM */
+		val |= PWM_CTRL_INVERT;
+	else
+		/* Duty cycle defines HIGH period of PWM */
+		val &= ~PWM_CTRL_INVERT;
+
+	pwm_loongson_writel(ddata, val, PWM_CTRL);
+
+	return 0;
+}
+
+static void pwm_loongson_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
+	u32 val;
+
+	if (pwm->state.polarity == PWM_POLARITY_NORMAL)
+		pwm_loongson_writel(ddata, ddata->period, PWM_DUTY);
+	else if (pwm->state.polarity == PWM_POLARITY_INVERSED)
+		pwm_loongson_writel(ddata, 0, PWM_DUTY);
+
+	val = pwm_loongson_readl(ddata, PWM_CTRL);
+	val &= ~PWM_CTRL_EN;
+	pwm_loongson_writel(ddata, val, PWM_CTRL);
+}
+
+static int pwm_loongson_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
+	u32 val;
+
+	pwm_loongson_writel(ddata, ddata->duty, PWM_DUTY);
+	pwm_loongson_writel(ddata, ddata->period, PWM_PERIOD);
+
+	val = pwm_loongson_readl(ddata, PWM_CTRL);
+	val |= PWM_CTRL_EN;
+	pwm_loongson_writel(ddata, val, PWM_CTRL);
+
+	return 0;
+}
+
+static u32 pwm_loongson_set_config(struct pwm_loongson_ddata *ddata, int ns,
+				   u64 clk_rate, u64 offset)
+{
+	u32 val;
+	u64 c;
+
+	c = clk_rate * ns;
+	do_div(c, NSEC_PER_SEC);
+	val = c < 1 ? 1 : c;
+
+	pwm_loongson_writel(ddata, val, offset);
+
+	return val;
+}
+
+static int pwm_loongson_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			       int duty_ns, int period_ns)
+{
+	struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
+	struct device *dev = chip->dev;
+	u64 clk_rate;
+
+	if (duty_ns > NANOHZ_PER_HZ || period_ns > NANOHZ_PER_HZ)
+		return -ERANGE;
+
+	clk_rate = has_acpi_companion(dev) ? PWM_FREQ_STD : clk_get_rate(ddata->clk);
+
+	ddata->duty = pwm_loongson_set_config(ddata, duty_ns, clk_rate, PWM_DUTY);
+	ddata->period = pwm_loongson_set_config(ddata, period_ns, clk_rate, PWM_PERIOD);
+
+	return 0;
+}
+
+static int pwm_loongson_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	int err;
+	bool enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity) {
+		if (enabled) {
+			pwm_loongson_disable(chip, pwm);
+			enabled = false;
+		}
+
+		err = pwm_loongson_set_polarity(chip, pwm, state->polarity);
+		if (err)
+			return err;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			pwm_loongson_disable(chip, pwm);
+		return 0;
+	}
+
+	err = pwm_loongson_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!enabled)
+		err = pwm_loongson_enable(chip, pwm);
+
+	return err;
+}
+
+static int pwm_loongson_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				  struct pwm_state *state)
+{
+	struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
+	u32 period, duty, ctrl;
+	u64 ns;
+
+	ctrl = pwm_loongson_readl(ddata, PWM_CTRL);
+	state->polarity = (ctrl & PWM_CTRL_INVERT) ? PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL;
+	state->enabled = (ctrl & PWM_CTRL_EN) ? true : false;
+
+	duty = pwm_loongson_readl(ddata, PWM_DUTY);
+	ns = duty * NSEC_PER_SEC;
+	state->duty_cycle = do_div(ns, duty);
+
+	period = pwm_loongson_readl(ddata, PWM_PERIOD);
+	ns = period * NSEC_PER_SEC;
+	state->period = do_div(ns, period);
+
+	ddata->ctrl = ctrl;
+	ddata->duty = pwm_loongson_readl(ddata, PWM_DUTY);
+	ddata->period = pwm_loongson_readl(ddata, PWM_PERIOD);
+
+	return 0;
+}
+
+static const struct pwm_ops pwm_loongson_ops = {
+	.apply = pwm_loongson_apply,
+	.get_state = pwm_loongson_get_state,
+};
+
+static int pwm_loongson_probe(struct platform_device *pdev)
+{
+	struct pwm_loongson_ddata *ddata;
+	struct device *dev = &pdev->dev;
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ddata->base))
+		return PTR_ERR(ddata->base);
+
+	if (!has_acpi_companion(dev)) {
+		ddata->clk = devm_clk_get_enabled(dev, NULL);
+		if (IS_ERR(ddata->clk))
+			return PTR_ERR(ddata->clk);
+	}
+
+	ddata->chip.dev = dev;
+	ddata->chip.ops = &pwm_loongson_ops;
+	ddata->chip.npwm = 1;
+	platform_set_drvdata(pdev, ddata);
+
+	return devm_pwmchip_add(dev, &ddata->chip);
+}
+
+static int pwm_loongson_suspend(struct device *dev)
+{
+	struct pwm_loongson_ddata *ddata = dev_get_drvdata(dev);
+
+	ddata->ctrl = pwm_loongson_readl(ddata, PWM_CTRL);
+	ddata->duty = pwm_loongson_readl(ddata, PWM_DUTY);
+	ddata->period = pwm_loongson_readl(ddata, PWM_PERIOD);
+
+	clk_disable_unprepare(ddata->clk);
+
+	return 0;
+}
+
+static int pwm_loongson_resume(struct device *dev)
+{
+	struct pwm_loongson_ddata *ddata = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(ddata->clk);
+	if (ret)
+		return ret;
+
+	pwm_loongson_writel(ddata, ddata->ctrl, PWM_CTRL);
+	pwm_loongson_writel(ddata, ddata->duty, PWM_DUTY);
+	pwm_loongson_writel(ddata, ddata->period, PWM_PERIOD);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(pwm_loongson_pm_ops, pwm_loongson_suspend,
+				pwm_loongson_resume);
+
+static const struct of_device_id pwm_loongson_of_ids[] = {
+	{ .compatible = "loongson,ls7a-pwm" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, pwm_loongson_of_ids);
+
+static const struct acpi_device_id pwm_loongson_acpi_ids[] = {
+	{ "LOON0006" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, pwm_loongson_acpi_ids);
+
+static struct platform_driver pwm_loongson_driver = {
+	.probe  = pwm_loongson_probe,
+	.driver = {
+		.name   = "loongson-pwm",
+		.pm	= pm_ptr(&pwm_loongson_pm_ops),
+		.of_match_table   = pwm_loongson_of_ids,
+		.acpi_match_table = pwm_loongson_acpi_ids,
+	},
+};
+module_platform_driver(pwm_loongson_driver);
+
+MODULE_DESCRIPTION("Loongson PWM driver");
+MODULE_AUTHOR("Loongson Technology Corporation Limited.");
+MODULE_LICENSE("GPL");
-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux