[PATCH v10 2/8] perf: imx_perf: add macro definitions for parsing config attr

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The user can set event and counter in cmdline and the driver need to parse
it using 'config' attr value. This will add macro definitions to avoid
hard-code in driver.

Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>

---
Changes in v4:
 - new patch
Changes in v5:
 - move this patch earlier
Changes in v6:
 - no changes
Changes in v7:
 - use FIELD_*
Changes in v8:
 - add Rb tag
Changes in v9:
 - add Rb tag
Changes in v10:
 - no changes
---
 drivers/perf/fsl_imx9_ddr_perf.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/perf/fsl_imx9_ddr_perf.c b/drivers/perf/fsl_imx9_ddr_perf.c
index 72c2d3074cde..0017f2c9ef91 100644
--- a/drivers/perf/fsl_imx9_ddr_perf.c
+++ b/drivers/perf/fsl_imx9_ddr_perf.c
@@ -42,6 +42,9 @@
 #define NUM_COUNTERS		11
 #define CYCLES_COUNTER		0
 
+#define CONFIG_EVENT		GENMASK(7, 0)
+#define CONFIG_COUNTER		GENMASK(15, 8)
+
 #define to_ddr_pmu(p)		container_of(p, struct ddr_pmu, pmu)
 
 #define DDR_PERF_DEV_NAME	"imx9_ddr"
@@ -339,8 +342,10 @@ static void ddr_perf_counter_local_config(struct ddr_pmu *pmu, int config,
 				    int counter, bool enable)
 {
 	u32 ctrl_a;
+	int event;
 
 	ctrl_a = readl_relaxed(pmu->base + PMLCA(counter));
+	event = FIELD_GET(CONFIG_EVENT, config);
 
 	if (enable) {
 		ctrl_a |= PMLCA_FC;
@@ -352,7 +357,7 @@ static void ddr_perf_counter_local_config(struct ddr_pmu *pmu, int config,
 		ctrl_a &= ~PMLCA_FC;
 		ctrl_a |= PMLCA_CE;
 		ctrl_a &= ~FIELD_PREP(PMLCA_EVENT, 0x7F);
-		ctrl_a |= FIELD_PREP(PMLCA_EVENT, (config & 0x000000FF));
+		ctrl_a |= FIELD_PREP(PMLCA_EVENT, event);
 		writel(ctrl_a, pmu->base + PMLCA(counter));
 	} else {
 		/* Freeze counter. */
@@ -366,8 +371,8 @@ static void ddr_perf_monitor_config(struct ddr_pmu *pmu, int cfg, int cfg1, int
 	u32 pmcfg1, pmcfg2;
 	int event, counter;
 
-	event = cfg & 0x000000FF;
-	counter = (cfg & 0x0000FF00) >> 8;
+	event = FIELD_GET(CONFIG_EVENT, cfg);
+	counter = FIELD_GET(CONFIG_COUNTER, cfg);
 
 	pmcfg1 = readl_relaxed(pmu->base + PMCFG1);
 
@@ -469,7 +474,7 @@ static int ddr_perf_event_add(struct perf_event *event, int flags)
 	int cfg2 = event->attr.config2;
 	int counter;
 
-	counter = (cfg & 0x0000FF00) >> 8;
+	counter = FIELD_GET(CONFIG_COUNTER, cfg);
 
 	pmu->events[counter] = event;
 	pmu->active_events++;
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux