Re: [PATCH 0/6] Add support for BCM2712 SD card controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrea,

Am 14.04.24 um 00:14 schrieb Andrea della Porta:
Hi,

This patchset adds support for the SDHCI controller on Broadcom BCM2712
SoC in order to make it possible to boot (particularly) Raspberry Pi 5
from SD card. This work is heavily based on downstream contributions.
since your goal is minimal Raspberry Pi 5 support, i suggest to use this
as the subject for this patch.
Patch #1 and 2: introduce the dt binding definitions for, respectively,
the new pin cfg/mux controller and the SD host controller as a preparatory
step for the upcoming dts.

Patch #3: add a somewhat reasonable (*almost* bare-minimum) dts to be used
to boot Rpi5 boards. Since till now there was no support at all for any
2712 based chipset, both the SoC and board dts plus definitions for the
new Pin and SD host controller have been added.
The patch still seems to contain a lot unnecessary stuff (Wifi, BT,
SPI), please try to remove as much as possible for the minimal support
(just boot via debug UART & SD card) in order to make review easier. Btw
this patch must be after pinctrl & SDHCI support.
Patch #4: the driver supporting the pin controller. Based on [1] and
successive fix commits.

Patch #5: add SDHCI support. Based on [2] and the next 2 fix commits.
Drop the SD Express implementation for now, that will be added by patch
#6.

Patch #6: this patch offers SD Express support and can be considered totally
optional. The callback plumbing is slightly different w.r.t. the downstream
approach (see [3]), as explained in the patch comment. Not sure what is the best,
any comment is highly appreciated.
I don't think this should be necessary for minimal Raspberry Pi 5
support. Maybe this should be addressed later.

More important would be an additional patch which enables the necessary
drivers in arm64/defconfig.

Tested succesfully on Raspberry Pi 5 using an SDxC card as the boot device.

Still untested:
- SD Express due to the lack of an Express capable card.
   Also, it will need PCIe support first.
- card detection pin, since the sd was the booting and root fs device.

Many thanks,
Andrea

Links:
[1] - https://github.com/raspberrypi/linux/commit/d9b655314a826724538867bf9b6c229d04c25d84
[2] - https://github.com/raspberrypi/linux/commit/e3aa070496e840e72a4dc384718690ea4125fa6a
[3] - https://github.com/raspberrypi/linux/commit/eb1df34db2a9a5b752eba40ee298c4ae87e26e87

Andrea della Porta (6):
   dt-bindings: pinctrl: Add support for BCM2712 pin controller
   dt-bindings: mmc: Add support for BCM2712 SD host controller
   arm64: dts: broadcom: Add support for BCM2712
   pinctrl: bcm: Add pinconf/pinmux controller driver for BCM2712
   mmc: sdhci-brcmstb: Add BCM2712 support
   mmc: sdhci-brcmstb: Add BCM2712 SD Express support

  .../bindings/mmc/brcm,sdhci-brcmstb.yaml      |   51 +-
  .../pinctrl/brcm,bcm2712-pinctrl.yaml         |   99 ++
  arch/arm64/boot/dts/broadcom/Makefile         |    1 +
  .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     |  313 +++++
  arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi |   81 ++
  arch/arm64/boot/dts/broadcom/bcm2712.dtsi     |  841 +++++++++++
  drivers/mmc/host/Kconfig                      |    1 +
  drivers/mmc/host/sdhci-brcmstb.c              |  275 ++++
  drivers/pinctrl/bcm/Kconfig                   |    9 +
  drivers/pinctrl/bcm/Makefile                  |    1 +
  drivers/pinctrl/bcm/pinctrl-bcm2712.c         | 1247 +++++++++++++++++
  11 files changed, 2918 insertions(+), 1 deletion(-)
  create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm2712-pinctrl.yaml
  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712.dtsi
  create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2712.c







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux