> Subject: Re: [PATCH 1/3] dt-bindings: pinctrl: support i.MX95 SCMI pinctrl > > On Fri, Apr 12, 2024 at 08:29:25AM +0800, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@xxxxxxx> > > > > i.MX95 Pinctrl is managed by SCMI firmware using OEM extensions. This > > patch is to add i.MX95 Pinctrl OEM extensions properties. > > > Describe your changes in imperative mood, e.g. “make xyzzy do frotz” ... > > "Add properties for i.MX95 Pinctrl OEM extensions." ok. I will update in v2. Regards, Peng. > > > > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx> > > --- > > .../bindings/pinctrl/nxp,imx95-pinctrl.yaml | 44 > ++++++++++++++++++++++ > > 1 file changed, 44 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/pinctrl/nxp,imx95-pinctrl.yaml > > b/Documentation/devicetree/bindings/pinctrl/nxp,imx95-pinctrl.yaml > > new file mode 100644 > > index 000000000000..4bf7a6192813 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pinctrl/nxp,imx95-pinctrl.yaml > > @@ -0,0 +1,44 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2024 > > +NXP %YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pinctrl/nxp,imx95-pinctrl.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: i.MX System Control and Management Interface (SCMI) Pinctrl > > +Protocol > > + > > +maintainers: > > + - Peng Fan <peng.fan@xxxxxxx> > > + > > +patternProperties: > > + '-pins$': false > > + 'grp$': > > + type: object > > + > > + properties: > > + $nodename: > > + pattern: "^[0-9a-f]+$" > > + > > + pins: > > + $ref: /schemas/types.yaml#/definitions/string > > + description: name of the pin > > + > > + nxp,func-id: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: high impedance mode ("third-state", "floating") > > + > > + nxp,pin-conf: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: latch weakly > > + > > + nxp,daisy-id: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: pull up the pin. Takes as optional argument on hardware > > + supporting it the pull strength in Ohm. > > + > > + nxp,daisy-conf: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: pull down the pin. Takes as optional argument on > hardware > > + supporting it the pull strength in Ohm. > > + > > +additionalProperties: true > > > > -- > > 2.37.1 > >
