On Fri, Apr 12, 2024 at 06:47:08PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@xxxxxxx> > > Add i.MX SCMI Extension protocols bindings for: > - Battery Backed Module(BBM) Protocol > This contains persistent storage (GPR), an RTC, and the ON/OFF button. > The protocol can also provide access to similar functions implemented via > external board components. > - MISC Protocol. > This includes controls that are misc settings/actions that must be exposed > from the SM to agents. They are device specific and are usually define to > access bit fields in various mix block control modules, IOMUX_GPR, and other > GPR/CSR owned by the SM. > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx> > --- > .../devicetree/bindings/firmware/arm,scmi.yaml | 21 +++++++++++++ > .../bindings/firmware/nxp,imx95-scmi.yaml | 36 ++++++++++++++++++++++ > 2 files changed, 57 insertions(+) > > diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml > index 93fb7d05f849..fa2cc910c485 100644 > --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml > +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml > @@ -247,6 +247,27 @@ properties: > reg: > const: 0x18 > > + protocol@81: > + $ref: '#/$defs/protocol-node' > + unevaluatedProperties: false > + > + properties: > + reg: > + const: 0x81 > + > + protocol@84: > + type: object > + anyOf: > + - allOf: > + - $ref: /schemas/firmware/nxp,imx95-scmi.yaml > + - $ref: '#/$defs/protocol-node' If you put the ref under the protocol node, then it's 1 schema file per protocol per vendor. Also, we then have to list every possible protocol node here, and every one listed here will be valid for every vendor. What we discussed is putting the list of vendor protocol schemas at the top-level here and then the vendor schemas can list out all the protocol nodes. Also, move "$ref: '#/$defs/protocol-node'" to nxp,imx95-scmi.yaml. > + > + unevaluatedProperties: false > + > + properties: > + reg: > + const: 0x84 > + > additionalProperties: false > > $defs: > diff --git a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml > new file mode 100644 > index 000000000000..b84c4a53b78a > --- /dev/null > +++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml > @@ -0,0 +1,36 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2024 NXP > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension > + > +maintainers: > + - Peng Fan <peng.fan@xxxxxxx> > + > +properties: > + nxp,wakeup-sources: > + description: > + Each entry consists of 2 integers, represents the source and electric signal edge > + items: > + items: > + - description: the wakeup source > + - description: the wakeup electric signal edge > + minItems: 1 > + maxItems: 32 > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + > +if: > + properties: > + reg: > + const: 0x84 This schema is only included from protocol@84 node, so how can this be false? > +then: > + properties: > + nxp,wakeup-sources: true > +else: > + properties: > + nxp,wakeup-sources: false > + > +additionalProperties: true > > -- > 2.37.1 >
