Hi, This series first adds device nodes for USB0_PHY_CTRL and USB1_PHY_CTRL in the wkup_conf node and fixes up the USB nodes to use the newly added nodes. Then it adds USB support for AM62P SoC and AM62P5-SK board. cheers, -roger --- Changes in v7: - Rebased on v6.9-rc1 ti-next/ti-k3-dts-next - Link to v6 https://lore.kernel.org/all/20240226-b4-for-v6-5-am62-usb-typec-dt-v6-0-acf77fff4344@xxxxxxxxxx/ To: Nishanth Menon <nm@xxxxxx> To: Vignesh Raghavendra <vigneshr@xxxxxx> To: Tero Kristo <kristo@xxxxxxxxxx> To: Rob Herring <robh@xxxxxxxxxx> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> To: Conor Dooley <conor+dt@xxxxxxxxxx> Cc: Andrew Davis <afd@xxxxxx> Cc: <b-liu@xxxxxx> Cc: <srk@xxxxxx> Cc: <r-gunasekaran@xxxxxx> Cc: <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx> Cc: <devicetree@xxxxxxxxxxxxxxx> Cc: <linux-kernel@xxxxxxxxxxxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx> --- Roger Quadros (3): arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers arm64: dts: ti: k3-am62p: add the USB sub-system arm64: dts: ti: k3-am62a: Disable USB LPM arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 4 +- arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 10 +++++ arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 8 +++- arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 10 +++++ arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 52 ++++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi | 10 +++++ arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 67 +++++++++++++++++++++++++++++ 7 files changed, 157 insertions(+), 4 deletions(-) --- base-commit: 534ad093bb80f19c20b251a89f09ce1a0e3d4f2d change-id: 20240325-for-v6-10-am62-usb-typec-dt-564a902aa674 Best regards, -- Roger Quadros <rogerq@xxxxxxxxxx>