[PATCH v5 00/11] Improvements to Tegra-based Chromebook support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




v5:	* Moved to use gpio-restart for reboots, had to make tegra_pmc_restart
	a notification handler

v4:	* Added support for the system reset GPIO, for proper reboots
	* Moved out changes to ASOC to their own series, as requested by Mark
	Brown
	* Added patch to reset the SOR, to make sure it's in a known state
	* Changed nvidia,model property of the sound nodes to GoogleNyanBig
	and GoogleNyanBlaze so they can be told apart in userspace

v3:	* Added bindings for the LTN140AT29 panel
	* Removed the delay in pwrseq, as what was actually needed was to add
	a dependency on the power supplies of the host
	* Uses the pinmux for the Blaze as generated by tegra-pinmux-scripts
	* Uses the pinmux for the Big as in the last patch from Simon Glass

Hello,

this series adds support for the Tegra-based HP Chromebook 14 (aka nyan
blaze), which is very similar to the Acer Chromebook 13 (aka nyan big).
Because they both include tegra124-nyan.dtsi, some improvements to Blaze
support have also benefitted the Big. I have tested that USB2, the panels,
HDMI, the trackpad, Wifi and sound work on both.

The leaf DTs contain the whole pinmux configuration as generated by
tegra-pinmux-scripts. I chose to not put the common configuration in the
common dtsi so we can paste the output as is and be sure that the kernel
doesn't diverge from the canonical data.

These patches are based on top of linux-next 20150212.

http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=nyan-v5

Regards,

Tomeu

David Riley (1):
  soc/tegra: pmc: move to using a restart handler

Stéphane Marchesin (1):
  drm/panel: add support for Samsung LTN140AT29 panel

Tomeu Vizoso (9):
  ARM: tegra: Change model of sound card in Nyan Big
  ARM: tegra: Move out nyan-generic parts out from the nyan-big DT
  ARM: tegra: Add DTS for the nyan-blaze board
  ARM: tegra: Add node for trackpad in Nyan boards
  ARM: tegra: Use pwrseq-simple for the wifi in Nyan
  ARM: tegra: Use the generated pinmux data
  ARM: tegra: Set spi-max-frequency property to flash node
  drm/tegra: Reset the SOR on probe
  ARM: tegra: Add gpio-restart node

 .../bindings/panel/samsung,ltn140at29-301.txt      |    7 +
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/tegra124-nyan-big.dts            | 2119 +++++++++++---------
 arch/arm/boot/dts/tegra124-nyan-blaze.dts          | 1332 ++++++++++++
 arch/arm/boot/dts/tegra124-nyan.dtsi               |  694 +++++++
 arch/arm/mach-tegra/tegra.c                        |    1 -
 drivers/gpu/drm/panel/panel-simple.c               |   26 +
 drivers/gpu/drm/tegra/sor.c                        |   14 +
 drivers/soc/tegra/pmc.c                            |   31 +-
 9 files changed, 3253 insertions(+), 972 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt
 create mode 100644 arch/arm/boot/dts/tegra124-nyan-blaze.dts
 create mode 100644 arch/arm/boot/dts/tegra124-nyan.dtsi

-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux