Re: [PATCH v2] arm64: dts: mediatek: mt8192: Add missing trip point in thermal zone

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 10/04/24 10:40, Hsin-Te Yuan ha scritto:
According to Documentation/driver-api/thermal/power_allocator.rst, there
should be two passive trip points. Adding the missing trip point to
ensure that the governor works optimally.

Fixes: c7a728051f4e ("arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>

That's better - but while I can agree about setting a general temperature
for that, I still have a few questions and requests:

1. Why is this 68°C? Was that value provided by MediaTek, or was it calculated?
 1b. If this was calculated, please, can you explain how?

2. The power allocator documentation also says that the governor works good
   when a "sustainable dissipatable power" parameter is fed to it through the
   `sustainable-power` devicetree property (with that being strictly board
   specific and never SoC-global, as that depends on the form factor and on
   the cooling method of the machine), can you please also add the right
   sustainable power indication to the Chromebook devicetrees?
   In the MT8192 specific case, that's mt8192-asurada.dtsi.

3. I just noticed that MT8192 is not the only one that would be affected by
   the issue that you're describing in this commit; can you please perform a
   similar change on the others, if parameters are known?

Thanks,
Angelo

---
Changes in v2:
- Clearify the reason of adding another passive trip point
- Link to v1: https://lore.kernel.org/r/20240410-upstream-torvalds-master-v1-1-852e903f0cec@xxxxxxxxxxxx
---
  arch/arm64/boot/dts/mediatek/mt8192.dtsi | 40 ++++++++++++++++++++++++++++++++
  1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 05e401670bced..08d8bccc84669 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -1959,6 +1959,11 @@ cpu0-thermal {
  			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
trips {
+				cpu0_thres: trip-point {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
  				cpu0_alert: trip-alert {
  					temperature = <85000>;
  					hysteresis = <2000>;
@@ -1989,6 +1994,11 @@ cpu1-thermal {
  			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
trips {
+				cpu1_thres: trip-point {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
  				cpu1_alert: trip-alert {
  					temperature = <85000>;
  					hysteresis = <2000>;
@@ -2019,6 +2029,11 @@ cpu2-thermal {
  			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
trips {
+				cpu2_thres: trip-point {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
  				cpu2_alert: trip-alert {
  					temperature = <85000>;
  					hysteresis = <2000>;
@@ -2049,6 +2064,11 @@ cpu3-thermal {
  			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
trips {
+				cpu3_thres: trip-point {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
  				cpu3_alert: trip-alert {
  					temperature = <85000>;
  					hysteresis = <2000>;
@@ -2079,6 +2099,11 @@ cpu4-thermal {
  			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
trips {
+				cpu4_thres: trip-point {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
  				cpu4_alert: trip-alert {
  					temperature = <85000>;
  					hysteresis = <2000>;
@@ -2109,6 +2134,11 @@ cpu5-thermal {
  			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
trips {
+				cpu5_thres: trip-point {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
  				cpu5_alert: trip-alert {
  					temperature = <85000>;
  					hysteresis = <2000>;
@@ -2139,6 +2169,11 @@ cpu6-thermal {
  			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
trips {
+				cpu6_thres: trip-point {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
  				cpu6_alert: trip-alert {
  					temperature = <85000>;
  					hysteresis = <2000>;
@@ -2169,6 +2204,11 @@ cpu7-thermal {
  			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
trips {
+				cpu7_thres: trip-point {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
  				cpu7_alert: trip-alert {
  					temperature = <85000>;
  					hysteresis = <2000>;

---
base-commit: 20cb38a7af88dc40095da7c2c9094da3873fea23
change-id: 20240410-upstream-torvalds-master-40aeff5416c7

Best regards,






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux