The temperature output register of the Loongson-2K2000 is defined in the
chip configuration domain, which is different from the Loongson-2K1000,
so it can't be fallbacked.
We need to use two groups of registers to describe it: the first group
is the high and low temperature threshold setting register; the second
group is the temperature output register.
It is true that this fix will cause ABI corruption, but it is necessary
otherwise the Loongson-2K2000 temperature sensor will not work properly.
Fixes: 72684d99a854 ("thermal: dt-bindings: add loongson-2 thermal")
Cc: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
.../thermal/loongson,ls2k-thermal.yaml | 22 +++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
index 9748a479dcd4..a25b42702788 100644
--- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -18,14 +18,15 @@ properties:
oneOf:
- enum:
- loongson,ls2k1000-thermal
+ - loongson,ls2k2000-thermal
- items:
- enum:
- loongson,ls2k0500-thermal
- - loongson,ls2k2000-thermal
- const: loongson,ls2k1000-thermal
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
interrupts:
maxItems: 1
@@ -41,6 +42,23 @@ required:
unevaluatedProperties: false
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - loongson,ls2k2000-thermal
+
+then:
+ properties:
+ reg:
+ maxItems: 2
+
+else:
+ properties:
+ reg:
+ maxItems: 1
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
--
2.43.0
