Enable HDMI nodes and add the output connector.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
.../freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 86d3da36e4f3e..c51ed7d991d18 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -135,6 +135,18 @@ led-2 {
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "X44";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
display: display {
/*
* Display is not fixed, so compatible has to be added from
@@ -470,6 +482,28 @@ &gpio5 {
"", "", "", "";
};
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
&i2c2 {
clock-frequency = <384000>;
pinctrl-names = "default", "gpio";
@@ -531,6 +565,10 @@ &i2c6 {
status = "okay";
};
+&lcdif3 {
+ status = "okay";
+};
+
&pcf85063 {
/* RTC_EVENT# is connected on MBa8MPxL */
pinctrl-names = "default";
--
2.34.1
