The TRULY TFT480800-16-E panel is driven by the Himax HX8369A driver IC.
The driver IC supports several display/control interface modes, including
the MIPI DSI video mode and command mode.
Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
---
v8->v9:
* Rebase onto the imx-drm/next branch of Philipp Zabel's open git repository.
v7->v8:
* None.
v6->v7:
* None.
v5->v6:
* None.
v4->v5:
* Replace the bs[3:0]-gpios properties with the bs-gpios property.
This addresses Andrzej Hajda's comment.
v3->v4:
* None.
v2->v3:
* None.
v1->v2:
* To address Thierry Reding's comments, remove several unnecessary
properties as they can be implied by the compatible string.
* Fix the compatible string.
* Remove the display-timings node from the panel node as it can be
implied by the compatible string as well.
* Remove the status property as it is unneeded.
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f1cd214..9ff4ba5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -480,6 +480,13 @@
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
+
+ pinctrl_mipi_panel: mipipanelgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+ >;
+ };
};
gpio_leds {
@@ -516,6 +523,19 @@
};
};
+&mipi_dsi {
+ status = "okay";
+
+ panel {
+ compatible = "truly,tft480800-16-e-dsi";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi_panel>;
+ reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ bs-gpios = <0>, <0>, <&gpio6 14 GPIO_ACTIVE_HIGH>, <0>;
+ };
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
