Hi Andrejs Cainikovs, On Fri, 15 Mar 2024 11:25:00 +0100, Andrejs Cainikovs wrote: > In current configuration, wm8904 codec on Dahlia carrier board provides > distorted audio output. This happens due to reference clock is fixed to > 25MHz and no FLL is enabled. During playback following parameters are set: > > 44100Hz: > > [ 310.276924] wm8904 1-001a: Target BCLK is 1411200Hz > [ 310.276990] wm8904 1-001a: Using 25000000Hz MCLK > [ 310.277001] wm8904 1-001a: CLK_SYS is 12500000Hz > [ 310.277018] wm8904 1-001a: Selected CLK_SYS_RATIO of 256 > [ 310.277026] wm8904 1-001a: Selected SAMPLE_RATE of 44100Hz > [ 310.277034] wm8904 1-001a: Selected BCLK_DIV of 80 for 1562500Hz BCLK > [ 310.277044] wm8904 1-001a: LRCLK_RATE is 35 > > [...] I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/1] arm64: dts: ti: verdin-am62: dahlia: fix audio clock commit: a15e5320d91abe68ff1123bb72583d629c49100c All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D