From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
Introduce bindings for TCM memory address space on AMD-xilinx Zynq
UltraScale+ platform. It will help in defining TCM in device-tree
and make it's access platform agnostic and data-driven.
Tightly-coupled memories(TCMs) are low-latency memory that provides
predictable instruction execution and predictable data load/store
timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
The TCM resources(reg, reg-names and power-domain) are documented for
each TCM in the R5 node. The reg and reg-names are made as required
properties as we don't want to hardcode TCM addresses for future
platforms and for zu+ legacy implementation will ensure that the
old dts w/o reg/reg-names works and stable ABI is maintained.
It also extends the examples for TCM split and lockstep modes.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
---
Changes in v14:
- Remove previous RB tag
- Add xlnx,tcm-mode property
- Add Versal platform support
- Add Versal-NET platform support
.../remoteproc/xlnx,zynqmp-r5fss.yaml | 279 ++++++++++++++++--
1 file changed, 257 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index 78aac69f1060..6f13da11f593 100644
--- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -18,11 +18,26 @@ description: |
properties:
compatible:
- const: xlnx,zynqmp-r5fss
+ enum:
+ - xlnx,zynqmp-r5fss
+ - xlnx,versal-r5fss
+ - xlnx,versal-net-r52fss
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges:
+ description: |
+ Standard ranges definition providing address translations for
+ local R5F TCM address spaces to bus addresses.
xlnx,cluster-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
+ default: 1
description: |
The RPU MPCore can operate in split mode (Dual-processor performance), Safety
lock-step mode(Both RPU cores execute the same code in lock-step,
@@ -36,8 +51,16 @@ properties:
1: lockstep mode (default)
2: single cpu mode
+ xlnx,tcm-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Configure RPU TCM
+ 0: split mode
+ 1: lockstep mode
+
patternProperties:
- "^r5f-[a-f0-9]+$":
+ "^r(.*)@[0-9a-f]+$":
type: object
description: |
The RPU is located in the Low Power Domain of the Processor Subsystem.
@@ -52,10 +75,22 @@ patternProperties:
properties:
compatible:
- const: xlnx,zynqmp-r5f
+ enum:
+ - xlnx,zynqmp-r5f
+ - xlnx,versal-r5f
+ - xlnx,versal-net-r52f
+
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ maxItems: 4
power-domains:
- maxItems: 1
+ minItems: 2
+ maxItems: 5
mboxes:
minItems: 1
@@ -101,35 +136,235 @@ patternProperties:
required:
- compatible
+ - reg
+ - reg-names
- power-domains
- unevaluatedProperties: false
-
required:
- compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,versal-net-r52fss
+ then:
+ properties:
+ xlnx,tcm-mode: false
+
+ patternProperties:
+ "^r52f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+ - description: CTCM internal memory
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+ - const: ctcm0
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+ - description: CTCM power domain
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,zynqmp-r5fss
+ - xlnx,versal-r5fss
+ then:
+ if:
+ properties:
+ xlnx,cluster-mode:
+ enum: [1, 2]
+ then:
+ properties:
+ xlnx,tcm-mode:
+ enum: [1]
+
+ patternProperties:
+ "^r5f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+ - description: extra ATCM memory in lockstep mode
+ - description: extra BTCM memory in lockstep mode
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+ - const: atcm1
+ - const: btcm1
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+ - description: second ATCM power domain
+ - description: second BTCM power domain
+
+ required:
+ - xlnx,tcm-mode
+
+ else:
+ properties:
+ xlnx,tcm-mode:
+ enum: [0]
+
+ patternProperties:
+ "^r5f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+
+ required:
+ - xlnx,tcm-mode
additionalProperties: false
examples:
- |
- remoteproc {
- compatible = "xlnx,zynqmp-r5fss";
- xlnx,cluster-mode = <1>;
-
- r5f-0 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x7>;
- memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
- mbox-names = "tx", "rx";
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+
+ // Split mode configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <0>;
+ xlnx,tcm-mode = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+ <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
+
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
+ };
+
+ - |
+ //Lockstep configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <1>;
+ xlnx,tcm-mode = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>,
+ <0x0 0x20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
- r5f-1 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x8>;
- memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
- mbox-names = "tx", "rx";
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
};
...
--
2.25.1
