Hello Luca,
good catch, thanks for the patch!
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>
From: Luca Weiss <luca@xxxxxxxxx>
Sent: Monday, April 8, 2024 18:34
To: ~postmarketos/upstreaming@xxxxxxxxxxx <~postmarketos/upstreaming@xxxxxxxxxxx>; phone-devel@xxxxxxxxxxxxxxx <phone-devel@xxxxxxxxxxxxxxx>; Jonathan Cameron <jic23@xxxxxxxxxx>; Lars-Peter Clausen <lars@xxxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
Cc: linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx <devicetree@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>; Luca Weiss <luca@xxxxxxxxx>
Subject: [PATCH] dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list
This Message Is From an Untrusted Sender
You have not previously corresponded with this sender.
Before all supported sensors except for MPU{9150,9250,9255} were not
allowed to use i2c-gate in the bindings which excluded quite a few
supported sensors where this functionality is supported.
Switch the list of sensors to ones where the Linux driver explicitly
disallows support for the auxiliary bus ("inv_mpu_i2c_aux_bus"). Since
the driver is also based on "default: return true" this should scale
better into the future.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
This fixes dt validation error on qcom-msm8974-lge-nexus5-hammerhead
which uses mpu6515
arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dtb: mpu6515@68: i2c-gate: False schema does not allow {'#address-cells': [[1]], '#size-cells': [[0]], 'ak8963@f': {'compatible': ['asahi-kasei,ak8963'], 'reg': [[15]], 'gpios': [[40, 67, 0]], 'vid-supply': [[50]], 'vdd-supply': [[49]]}, 'bmp280@76': {'compatible': ['bosch,bmp280'], 'reg': [[118]], 'vdda-supply': [[50]], 'vddd-supply': [[49]]}}
from schema $id: https://urldefense.com/v3/__http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml*__;Iw!!FtrhtPsWDhZ6tw!Athn1pwCL_LPpZ97exHEFSkirApIqFF2ISY01IuyHtFBxpbPkcPWh_FmzB_TiCzb8uv1HO0AHY4IeIlv1-o$[devicetree[.]org]
---
.../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 297b8a1a7ffb..587ff2bced2d 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -62,14 +62,15 @@ properties:
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
- not:
- properties:
- compatible:
- contains:
- enum:
- - invensense,mpu9150
- - invensense,mpu9250
- - invensense,mpu9255
+ properties:
+ compatible:
+ contains:
+ enum:
+ - invensense,iam20680
+ - invensense,icm20602
+ - invensense,icm20608
+ - invensense,icm20609
+ - invensense,icm20689
then:
properties:
i2c-gate: false
---
base-commit: 8568bb2ccc278f344e6ac44af6ed010a90aa88dc
change-id: 20240408-mpu6050-i2c-gate-4ea473e492f4
Best regards,
--
Luca Weiss <luca@xxxxxxxxx>
