The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-emmc.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-nand.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6qp-phytec-mira-rdk-nand.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi index 1ca4d219609f..0b4c09b09c03 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi @@ -15,7 +15,7 @@ backlight: backlight { brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_backlight>; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; status = "okay"; }; @@ -224,7 +224,6 @@ &pcie { }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; -- 2.43.0