The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts index 028951955bde..72ee236d2f5e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts @@ -21,7 +21,7 @@ memory@10000000 { backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */ + pwms = <&pwm3 0 25000 0>; /* 25000ns -> 40kHz */ brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>; default-brightness-level = <7>; }; @@ -303,7 +303,6 @@ &ipu1_di0_disp0 { }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; -- 2.43.0
