The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts index 02648806c275..d3f14b4d3b51 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts @@ -36,7 +36,7 @@ memory@10000000 { backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm1 0 200000>; + pwms = <&pwm1 0 200000 0>; brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; num-interpolated-steps = <10>; default-brightness-level = <60>; @@ -117,14 +117,14 @@ led_red: led-0 { color = <LED_COLOR_ID_RED>; max-brightness = <248>; default-state = "off"; - pwms = <&pwm2 0 500000>; + pwms = <&pwm2 0 500000 0>; }; led_white: led-1 { color = <LED_COLOR_ID_WHITE>; max-brightness = <248>; default-state = "off"; - pwms = <&pwm3 0 500000>; + pwms = <&pwm3 0 500000 0>; linux,default-trigger = "heartbeat"; }; }; @@ -484,28 +484,24 @@ lvds0_out: endpoint { }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; -- 2.43.0