The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi index db1bc511e71f..758eaf9d93d2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi @@ -46,7 +46,7 @@ / { backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; @@ -346,7 +346,6 @@ &pcie { }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; -- 2.43.0
