The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts index cc861a43eb58..a5ac79346854 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts @@ -14,7 +14,7 @@ / { backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; @@ -79,6 +79,5 @@ &ipu1_di0_disp0 { }; &pwm1 { - #pwm-cells = <2>; status = "okay"; }; -- 2.43.0