Support the Analog Devices Generic AXI DAC IP core. The IP core is used for interfacing with digital-to-analog (DAC) converters that require either a high-speed serial interface (JESD204B/C) or a source synchronous parallel interface (LVDS/CMOS). Typically (for such devices) SPI will be used for configuration only, while this IP core handles the streaming of data into memory via DMA. Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx> --- MAINTAINERS | 1 + drivers/iio/dac/Kconfig | 21 ++ drivers/iio/dac/Makefile | 1 + drivers/iio/dac/adi-axi-dac.c | 635 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 658 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 76e872e320d7..505f28dc6da6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1413,6 +1413,7 @@ L: linux-iio@xxxxxxxxxxxxxxx S: Supported W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml +F: drivers/iio/dac/adi-axi-dac.c ANALOG DEVICES INC DMA DRIVERS M: Lars-Peter Clausen <lars@xxxxxxxxxx> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 34eb40bb9529..7c0a8caa9a34 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -131,6 +131,27 @@ config AD5624R_SPI Say yes here to build support for Analog Devices AD5624R, AD5644R and AD5664R converters (DAC). This driver uses the common SPI interface. +config ADI_AXI_DAC + tristate "Analog Devices Generic AXI DAC IP core driver" + select IIO_BUFFER + select IIO_BUFFER_DMAENGINE + select REGMAP_MMIO + select IIO_BACKEND + help + Say yes here to build support for Analog Devices Generic + AXI DAC IP core. The IP core is used for interfacing with + digital-to-analog (DAC) converters that require either a high-speed + serial interface (JESD204B/C) or a source synchronous parallel + interface (LVDS/CMOS). + Typically (for such devices) SPI will be used for configuration only, + while this IP core handles the streaming of data into memory via DMA. + + Link: https://wiki.analog.com/resources/fpga/docs/axi_dac_ip + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called adi-axi-dac. + config LTC2688 tristate "Analog Devices LTC2688 DAC spi driver" depends on SPI diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 55bf89739d14..6bcaa65434b2 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_AD5696_I2C) += ad5696-i2c.o obj-$(CONFIG_AD7293) += ad7293.o obj-$(CONFIG_AD7303) += ad7303.o obj-$(CONFIG_AD8801) += ad8801.o +obj-$(CONFIG_ADI_AXI_DAC) += adi-axi-dac.o obj-$(CONFIG_CIO_DAC) += cio-dac.o obj-$(CONFIG_DPOT_DAC) += dpot-dac.o obj-$(CONFIG_DS4424) += ds4424.o diff --git a/drivers/iio/dac/adi-axi-dac.c b/drivers/iio/dac/adi-axi-dac.c new file mode 100644 index 000000000000..9047c5aec0ff --- /dev/null +++ b/drivers/iio/dac/adi-axi-dac.c @@ -0,0 +1,635 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices Generic AXI DAC IP core + * Link: https://wiki.analog.com/resources/fpga/docs/axi_dac_ip + * + * Copyright 2016-2024 Analog Devices Inc. + */ +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/cleanup.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/limits.h> +#include <linux/kstrtox.h> +#include <linux/math.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/units.h> + +#include <linux/fpga/adi-axi-common.h> +#include <linux/iio/backend.h> +#include <linux/iio/buffer-dmaengine.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> + +/* + * Register definitions: + * https://wiki.analog.com/resources/fpga/docs/axi_dac_ip#register_map + */ + +/* Base controls */ +#define AXI_DAC_REG_CONFIG 0x0c +#define AXI_DDS_DISABLE BIT(6) + + /* DAC controls */ +#define AXI_DAC_REG_RSTN 0x0040 +#define AXI_DAC_RSTN_CE_N BIT(2) +#define AXI_DAC_RSTN_MMCM_RSTN BIT(1) +#define AXI_DAC_RSTN_RSTN BIT(0) +#define AXI_DAC_REG_CNTRL_1 0x0044 +#define AXI_DAC_SYNC BIT(0) +#define AXI_DAC_REG_CNTRL_2 0x0048 +#define ADI_DAC_R1_MODE BIT(4) +#define AXI_DAC_DRP_STATUS 0x0074 +#define AXI_DAC_DRP_LOCKED BIT(17) +/* DAC Channel controls */ +#define AXI_DAC_REG_CHAN_CNTRL_1(c) (0x0400 + (c) * 0x40) +#define AXI_DAC_REG_CHAN_CNTRL_3(c) (0x0408 + (c) * 0x40) +#define AXI_DAC_SCALE_SIGN BIT(15) +#define AXI_DAC_SCALE_INT BIT(14) +#define AXI_DAC_SCALE GENMASK(14, 0) +#define AXI_DAC_REG_CHAN_CNTRL_2(c) (0x0404 + (c) * 0x40) +#define AXI_DAC_REG_CHAN_CNTRL_4(c) (0x040c + (c) * 0x40) +#define AXI_DAC_PHASE GENMASK(31, 16) +#define AXI_DAC_FREQUENCY GENMASK(15, 0) +#define AXI_DAC_REG_CHAN_CNTRL_7(c) (0x0418 + (c) * 0x40) +#define AXI_DAC_DATA_SEL GENMASK(3, 0) + +/* 360 degrees in rad */ +#define AXI_DAC_2_PI_MEGA 6283190 +enum { + AXI_DAC_DATA_INTERNAL_TONE, + AXI_DAC_DATA_DMA = 2, +}; + +struct axi_dac_state { + struct regmap *regmap; + struct device *dev; + /* + * lock to protect multiple accesses to the device registers and global + * data/variables. + */ + struct mutex lock; + u64 dac_clk; + u32 reg_config; + bool int_tone; +}; + +static int axi_dac_enable(struct iio_backend *back) +{ + struct axi_dac_state *st = iio_backend_get_priv(back); + unsigned int __val; + int ret; + + guard(mutex)(&st->lock); + ret = regmap_set_bits(st->regmap, AXI_DAC_REG_RSTN, + AXI_DAC_RSTN_MMCM_RSTN); + if (ret) + return ret; + /* + * Make sure the DRP (Dynamic Reconfiguration Port) is locked. Not all + * designs really use it but if they don't we still get the lock bit + * set. So let's do it all the time so the code is generic. + */ + ret = regmap_read_poll_timeout(st->regmap, AXI_DAC_DRP_STATUS, __val, + __val & AXI_DAC_DRP_LOCKED, 100, 1000); + if (ret) + return ret; + + return regmap_set_bits(st->regmap, AXI_DAC_REG_RSTN, + AXI_DAC_RSTN_RSTN | AXI_DAC_RSTN_MMCM_RSTN); +} + +static void axi_dac_disable(struct iio_backend *back) +{ + struct axi_dac_state *st = iio_backend_get_priv(back); + + guard(mutex)(&st->lock); + regmap_write(st->regmap, AXI_DAC_REG_RSTN, 0); +} + +static struct iio_buffer *axi_dac_request_buffer(struct iio_backend *back, + struct iio_dev *indio_dev) +{ + struct axi_dac_state *st = iio_backend_get_priv(back); + const char *dma_name; + + if (device_property_read_string(st->dev, "dma-names", &dma_name)) + dma_name = "tx"; + + return iio_dmaengine_buffer_setup_ext(st->dev, indio_dev, dma_name, + IIO_BUFFER_DIRECTION_OUT); +} + +static void axi_dac_free_buffer(struct iio_backend *back, + struct iio_buffer *buffer) +{ + iio_dmaengine_buffer_free(buffer); +} + +enum { + AXI_DAC_FREQ_TONE_1, + AXI_DAC_FREQ_TONE_2, + AXI_DAC_SCALE_TONE_1, + AXI_DAC_SCALE_TONE_2, + AXI_DAC_PHASE_TONE_1, + AXI_DAC_PHASE_TONE_2, +}; + +static int __axi_dac_frequency_get(struct axi_dac_state *st, unsigned int chan, + unsigned int tone_2, unsigned int *freq) +{ + u32 reg, raw; + int ret; + + if (!st->dac_clk) { + dev_err(st->dev, "Sampling rate is 0...\n"); + return -EINVAL; + } + + if (tone_2) + reg = AXI_DAC_REG_CHAN_CNTRL_4(chan); + else + reg = AXI_DAC_REG_CHAN_CNTRL_2(chan); + + ret = regmap_read(st->regmap, reg, &raw); + if (ret) + return ret; + + raw = FIELD_GET(AXI_DAC_FREQUENCY, raw); + *freq = DIV_ROUND_CLOSEST_ULL(raw * st->dac_clk, BIT(16)); + + return 0; +} + +static int axi_dac_frequency_get(struct axi_dac_state *st, + const struct iio_chan_spec *chan, char *buf, + unsigned int tone_2) +{ + unsigned int freq; + int ret; + + scoped_guard(mutex, &st->lock) { + ret = __axi_dac_frequency_get(st, chan->channel, tone_2, &freq); + if (ret) + return ret; + } + + return sysfs_emit(buf, "%u\n", freq); +} + +static int axi_dac_scale_get(struct axi_dac_state *st, + const struct iio_chan_spec *chan, char *buf, + unsigned int tone_2) +{ + unsigned int scale, sign; + int ret, vals[2]; + u32 reg, raw; + + if (tone_2) + reg = AXI_DAC_REG_CHAN_CNTRL_3(chan->channel); + else + reg = AXI_DAC_REG_CHAN_CNTRL_1(chan->channel); + + ret = regmap_read(st->regmap, reg, &raw); + if (ret) + return ret; + + sign = FIELD_GET(AXI_DAC_SCALE_SIGN, raw); + raw = FIELD_GET(AXI_DAC_SCALE, raw); + scale = DIV_ROUND_CLOSEST_ULL((u64)raw * MEGA, AXI_DAC_SCALE_INT); + + vals[0] = scale / MEGA; + vals[1] = scale % MEGA; + + if (sign) { + vals[0] *= -1; + if (!vals[0]) + vals[1] *= -1; + } + + return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, ARRAY_SIZE(vals), + vals); +} + +static int axi_dac_phase_get(struct axi_dac_state *st, + const struct iio_chan_spec *chan, char *buf, + unsigned int tone_2) +{ + u32 reg, raw, phase; + int ret, vals[2]; + + if (tone_2) + reg = AXI_DAC_REG_CHAN_CNTRL_4(chan->channel); + else + reg = AXI_DAC_REG_CHAN_CNTRL_2(chan->channel); + + ret = regmap_read(st->regmap, reg, &raw); + if (ret) + return ret; + + raw = FIELD_GET(AXI_DAC_PHASE, raw); + phase = DIV_ROUND_CLOSEST_ULL((u64)raw * AXI_DAC_2_PI_MEGA, U16_MAX); + + vals[0] = phase / MEGA; + vals[1] = phase % MEGA; + + return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, ARRAY_SIZE(vals), + vals); +} + +static int __axi_dac_frequency_set(struct axi_dac_state *st, unsigned int chan, + u64 sample_rate, unsigned int freq, + unsigned int tone_2) +{ + u32 reg; + u16 raw; + int ret; + + if (!sample_rate || freq > sample_rate / 2) { + dev_err(st->dev, "Invalid frequency(%u) dac_clk(%llu)\n", + freq, sample_rate); + return -EINVAL; + } + + if (tone_2) + reg = AXI_DAC_REG_CHAN_CNTRL_4(chan); + else + reg = AXI_DAC_REG_CHAN_CNTRL_2(chan); + + raw = DIV64_U64_ROUND_CLOSEST((u64)freq * BIT(16), sample_rate); + + ret = regmap_update_bits(st->regmap, reg, AXI_DAC_FREQUENCY, raw); + if (ret) + return ret; + + /* synchronize channels */ + return regmap_set_bits(st->regmap, AXI_DAC_REG_CNTRL_1, AXI_DAC_SYNC); +} + +static int axi_dac_frequency_set(struct axi_dac_state *st, + const struct iio_chan_spec *chan, + const char *buf, size_t len, unsigned int tone_2) +{ + unsigned int freq; + int ret; + + ret = kstrtou32(buf, 10, &freq); + if (ret) + return ret; + + guard(mutex)(&st->lock); + ret = __axi_dac_frequency_set(st, chan->channel, st->dac_clk, freq, + tone_2); + if (ret) + return ret; + + return len; +} + +static int axi_dac_scale_set(struct axi_dac_state *st, + const struct iio_chan_spec *chan, + const char *buf, size_t len, unsigned int tone_2) +{ + int integer, frac, scale; + u32 raw = 0, reg; + int ret; + + ret = iio_str_to_fixpoint(buf, 100000, &integer, &frac); + if (ret) + return ret; + + scale = integer * MEGA + frac; + if (scale <= -2 * (int)MEGA || scale >= 2 * (int)MEGA) + return -EINVAL; + + /* format is 1.1.14 (sign, integer and fractional bits) */ + if (scale < 0) { + raw = FIELD_PREP(AXI_DAC_SCALE_SIGN, 1); + scale *= -1; + } + + raw |= div_u64((u64)scale * AXI_DAC_SCALE_INT, MEGA); + + if (tone_2) + reg = AXI_DAC_REG_CHAN_CNTRL_3(chan->channel); + else + reg = AXI_DAC_REG_CHAN_CNTRL_1(chan->channel); + + guard(mutex)(&st->lock); + ret = regmap_write(st->regmap, reg, raw); + if (ret) + return ret; + + /* synchronize channels */ + ret = regmap_set_bits(st->regmap, AXI_DAC_REG_CNTRL_1, AXI_DAC_SYNC); + if (ret) + return ret; + + return len; +} + +static int axi_dac_phase_set(struct axi_dac_state *st, + const struct iio_chan_spec *chan, + const char *buf, size_t len, unsigned int tone_2) +{ + int integer, frac, phase; + u32 raw, reg; + int ret; + + ret = iio_str_to_fixpoint(buf, 100000, &integer, &frac); + if (ret) + return ret; + + phase = integer * MEGA + frac; + if (phase < 0 || phase > AXI_DAC_2_PI_MEGA) + return -EINVAL; + + raw = DIV_ROUND_CLOSEST_ULL((u64)phase * U16_MAX, AXI_DAC_2_PI_MEGA); + + if (tone_2) + reg = AXI_DAC_REG_CHAN_CNTRL_4(chan->channel); + else + reg = AXI_DAC_REG_CHAN_CNTRL_2(chan->channel); + + guard(mutex)(&st->lock); + ret = regmap_update_bits(st->regmap, reg, AXI_DAC_PHASE, + FIELD_PREP(AXI_DAC_PHASE, raw)); + if (ret) + return ret; + + /* synchronize channels */ + ret = regmap_set_bits(st->regmap, AXI_DAC_REG_CNTRL_1, AXI_DAC_SYNC); + if (ret) + return ret; + + return len; +} + +static int axi_dac_ext_info_set(struct iio_backend *back, uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct axi_dac_state *st = iio_backend_get_priv(back); + + switch (private) { + case AXI_DAC_FREQ_TONE_1: + case AXI_DAC_FREQ_TONE_2: + return axi_dac_frequency_set(st, chan, buf, len, + private - AXI_DAC_FREQ_TONE_1); + case AXI_DAC_SCALE_TONE_1: + case AXI_DAC_SCALE_TONE_2: + return axi_dac_scale_set(st, chan, buf, len, + private - AXI_DAC_SCALE_TONE_1); + case AXI_DAC_PHASE_TONE_1: + case AXI_DAC_PHASE_TONE_2: + return axi_dac_phase_set(st, chan, buf, len, + private - AXI_DAC_PHASE_TONE_2); + default: + return -EOPNOTSUPP; + } +} + +static int axi_dac_ext_info_get(struct iio_backend *back, uintptr_t private, + const struct iio_chan_spec *chan, char *buf) +{ + struct axi_dac_state *st = iio_backend_get_priv(back); + + switch (private) { + case AXI_DAC_FREQ_TONE_1: + case AXI_DAC_FREQ_TONE_2: + return axi_dac_frequency_get(st, chan, buf, + private - AXI_DAC_FREQ_TONE_1); + case AXI_DAC_SCALE_TONE_1: + case AXI_DAC_SCALE_TONE_2: + return axi_dac_scale_get(st, chan, buf, + private - AXI_DAC_SCALE_TONE_1); + case AXI_DAC_PHASE_TONE_1: + case AXI_DAC_PHASE_TONE_2: + return axi_dac_phase_get(st, chan, buf, + private - AXI_DAC_PHASE_TONE_1); + default: + return -EOPNOTSUPP; + } +} + +static const struct iio_chan_spec_ext_info axi_dac_ext_info[] = { + IIO_BACKEND_EX_INFO("frequency0", IIO_SEPARATE, AXI_DAC_FREQ_TONE_1), + IIO_BACKEND_EX_INFO("frequency1", IIO_SEPARATE, AXI_DAC_FREQ_TONE_2), + IIO_BACKEND_EX_INFO("scale0", IIO_SEPARATE, AXI_DAC_SCALE_TONE_1), + IIO_BACKEND_EX_INFO("scale1", IIO_SEPARATE, AXI_DAC_SCALE_TONE_2), + IIO_BACKEND_EX_INFO("phase0", IIO_SEPARATE, AXI_DAC_PHASE_TONE_1), + IIO_BACKEND_EX_INFO("phase1", IIO_SEPARATE, AXI_DAC_PHASE_TONE_2), + {} +}; + +static int axi_dac_extend_chan(struct iio_backend *back, + struct iio_chan_spec *chan) +{ + struct axi_dac_state *st = iio_backend_get_priv(back); + + if (chan->type != IIO_ALTVOLTAGE) + return -EINVAL; + if (st->reg_config & AXI_DDS_DISABLE) + /* nothing to extend */ + return 0; + + chan->ext_info = axi_dac_ext_info; + + return 0; +} + +static int axi_dac_data_source_set(struct iio_backend *back, unsigned int chan, + enum iio_backend_data_source data) +{ + struct axi_dac_state *st = iio_backend_get_priv(back); + + switch (data) { + case IIO_BACKEND_INTERNAL_CONTINUOS_WAVE: + return regmap_update_bits(st->regmap, + AXI_DAC_REG_CHAN_CNTRL_7(chan), + AXI_DAC_DATA_SEL, + AXI_DAC_DATA_INTERNAL_TONE); + case IIO_BACKEND_EXTERNAL: + return regmap_update_bits(st->regmap, + AXI_DAC_REG_CHAN_CNTRL_7(chan), + AXI_DAC_DATA_SEL, AXI_DAC_DATA_DMA); + default: + return -EINVAL; + } +} + +static int axi_dac_set_sample_rate(struct iio_backend *back, unsigned int chan, + u64 sample_rate) +{ + struct axi_dac_state *st = iio_backend_get_priv(back); + unsigned int freq; + int ret, tone; + + if (!sample_rate) + return -EINVAL; + if (st->reg_config & AXI_DDS_DISABLE) + /* sample_rate has no meaning if DDS is disabled */ + return 0; + + guard(mutex)(&st->lock); + /* + * If dac_clk is 0 then this must be the first time we're being notified + * about the interface sample rate. Hence, just update our internal + * variable and bail... If it's not 0, then we get the current DDS + * frequency (for the old rate) and update the registers for the new + * sample rate. + */ + if (!st->dac_clk) { + st->dac_clk = sample_rate; + return 0; + } + + for (tone = 0; tone <= AXI_DAC_FREQ_TONE_2; tone++) { + ret = __axi_dac_frequency_get(st, chan, tone, &freq); + if (ret) + return ret; + + ret = __axi_dac_frequency_set(st, chan, sample_rate, tone, freq); + if (ret) + return ret; + } + + st->dac_clk = sample_rate; + + return 0; +} + +static const struct iio_backend_ops axi_dac_generic = { + .enable = axi_dac_enable, + .disable = axi_dac_disable, + .request_buffer = axi_dac_request_buffer, + .free_buffer = axi_dac_free_buffer, + .extend_chan_spec = axi_dac_extend_chan, + .ext_info_set = axi_dac_ext_info_set, + .ext_info_get = axi_dac_ext_info_get, + .data_source_set = axi_dac_data_source_set, + .set_sample_rate = axi_dac_set_sample_rate, +}; + +static const struct regmap_config axi_dac_regmap_config = { + .val_bits = 32, + .reg_bits = 32, + .reg_stride = 4, + .max_register = 0x0800, +}; + +static int axi_dac_probe(struct platform_device *pdev) +{ + const unsigned int *expected_ver; + struct axi_dac_state *st; + void __iomem *base; + unsigned int ver; + struct clk *clk; + int ret; + + st = devm_kzalloc(&pdev->dev, sizeof(*st), GFP_KERNEL); + if (!st) + return -ENOMEM; + + expected_ver = device_get_match_data(&pdev->dev); + if (!expected_ver) + return -ENODEV; + + clk = devm_clk_get_enabled(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + st->dev = &pdev->dev; + st->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &axi_dac_regmap_config); + if (IS_ERR(st->regmap)) + return PTR_ERR(st->regmap); + + /* + * Force disable the core. Up to the frontend to enable us. And we can + * still read/write registers... + */ + ret = regmap_write(st->regmap, AXI_DAC_REG_RSTN, 0); + if (ret) + return ret; + + ret = regmap_read(st->regmap, ADI_AXI_REG_VERSION, &ver); + if (ret) + return ret; + + if (ADI_AXI_PCORE_VER_MAJOR(ver) != ADI_AXI_PCORE_VER_MAJOR(*expected_ver)) { + dev_err(&pdev->dev, + "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n", + ADI_AXI_PCORE_VER_MAJOR(*expected_ver), + ADI_AXI_PCORE_VER_MINOR(*expected_ver), + ADI_AXI_PCORE_VER_PATCH(*expected_ver), + ADI_AXI_PCORE_VER_MAJOR(ver), + ADI_AXI_PCORE_VER_MINOR(ver), + ADI_AXI_PCORE_VER_PATCH(ver)); + return -ENODEV; + } + + /* Let's get the core read only configuration */ + ret = regmap_read(st->regmap, AXI_DAC_REG_CONFIG, &st->reg_config); + if (ret) + return ret; + + /* + * In some designs, setting the R1_MODE bit to 0 (which is the default + * value) causes all channels of the frontend to be routed to the same + * DMA (so they are sampled together). This is for things like + * Multiple-Input and Multiple-Output (MIMO). As most of the times we + * want independent channels let's override the core's default value and + * set the R1_MODE bit. + */ + ret = regmap_set_bits(st->regmap, AXI_DAC_REG_CNTRL_2, ADI_DAC_R1_MODE); + if (ret) + return ret; + + mutex_init(&st->lock); + ret = devm_iio_backend_register(&pdev->dev, &axi_dac_generic, st); + if (ret) + return ret; + + dev_info(&pdev->dev, "AXI DAC IP core (%d.%.2d.%c) probed\n", + ADI_AXI_PCORE_VER_MAJOR(ver), + ADI_AXI_PCORE_VER_MINOR(ver), + ADI_AXI_PCORE_VER_PATCH(ver)); + + return 0; +} + +static unsigned int axi_dac_9_1_b_info = ADI_AXI_PCORE_VER(9, 1, 'b'); + +static const struct of_device_id axi_dac_of_match[] = { + { .compatible = "adi,axi-dac-9.1.b", .data = &axi_dac_9_1_b_info }, + {} +}; +MODULE_DEVICE_TABLE(of, axi_dac_of_match); + +static struct platform_driver axi_dac_driver = { + .driver = { + .name = "adi-axi-dac", + .of_match_table = axi_dac_of_match, + }, + .probe = axi_dac_probe, +}; +module_platform_driver(axi_dac_driver); + +MODULE_AUTHOR("Nuno Sa <nuno.sa@xxxxxxxxxx>"); +MODULE_DESCRIPTION("Analog Devices Generic AXI DAC IP core driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_DMAENGINE_BUFFER); +MODULE_IMPORT_NS(IIO_BACKEND); -- 2.44.0
