Re: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs

[Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>]

On 4/2/2024 2:47 PM, Dmitry Baryshkov wrote:
> On Tue, 2 Apr 2024 at 12:04, Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> wrote:
> > Enable the ADSP, CDSP and WPSS that are found on qcs6490-rb3gen2.
>
> No MPSS even for GPS?

Earlier was thinking of sending a separate patch for that.
Anyway, will add MPSS too in the next series.

Thanks
Komal

> Anyway,
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
> > Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 15 +++++++++++++++
> >   1 file changed, 15 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > index 97824c769ba3..a25431ddf922 100644
> > --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > @@ -434,6 +434,21 @@ &qupv3_id_0 {
> >          status = "okay";
> >   };
> >
> > +&remoteproc_adsp {
> > +       firmware-name = "qcom/qcm6490/adsp.mbn";
> > +       status = "okay";
> > +};
> > +
> > +&remoteproc_cdsp {
> > +       firmware-name = "qcom/qcm6490/cdsp.mbn";
> > +       status = "okay";
> > +};
> > +
> > +&remoteproc_wpss {
> > +       firmware-name = "qcom/qcm6490/wpss.mbn";
> > +       status = "okay";
> > +};
> > +
> >   &tlmm {
> >          gpio-reserved-ranges = <32 2>, /* ADSP */
> >                                 <48 4>; /* NFC */
> > --
> > 2.42.0