By checking the pmic node with microchip,mcp16502.yaml#
'regulator-suspend-voltage' does not match any of the
regexes 'pinctrl-[0-9]+' from schema microchip,mcp16502.yaml#
which inherits regulator.yaml#. So replace regulator-suspend-voltage
with regulator-suspend-microvolt to avoid the inconsitency.
Fixes: ebd6591f8ddb ("ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board")
Signed-off-by: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
---
v1 -> v2:
- drop "boot" from title
- put in commit message a snippet with the warning to explain the change
---
arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
index 4f609e9e510e..009d2c832421 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
@@ -242,7 +242,7 @@ vddcore: VDD_CORE {
regulator-state-standby {
regulator-on-in-suspend;
- regulator-suspend-voltage = <1150000>;
+ regulator-suspend-microvolt = <1150000>;
regulator-mode = <4>;
};
@@ -263,7 +263,7 @@ vddcpu: VDD_OTHER {
regulator-state-standby {
regulator-on-in-suspend;
- regulator-suspend-voltage = <1050000>;
+ regulator-suspend-microvolt = <1050000>;
regulator-mode = <4>;
};
@@ -280,7 +280,7 @@ vldo1: LDO1 {
regulator-always-on;
regulator-state-standby {
- regulator-suspend-voltage = <1800000>;
+ regulator-suspend-microvolt = <1800000>;
regulator-on-in-suspend;
};
@@ -296,7 +296,7 @@ vldo2: LDO2 {
regulator-always-on;
regulator-state-standby {
- regulator-suspend-voltage = <3300000>;
+ regulator-suspend-microvolt = <3300000>;
regulator-on-in-suspend;
};
--
2.34.1
