On Tue, Mar 5, 2024 at 2:18 AM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > Hello Adam, > > Thank you for the patch. > > On Mon, Mar 04, 2024 at 06:48:57PM -0600, Adam Ford wrote: > > The IRQ registration currently assumes that the GPIO is dedicated > > to it, but that may not necessarily be the case. If the board has > > another device sharing the GPIO, it won't be registered and the > > hot-plug detect fails to function. > > > > Currently, the handler reads two registers and blindly > > assumes one of them caused the interrupt and returns IRQ_HANDLED > > unless there is an error. In order to properly do this, the IRQ > > handler needs to check if it needs to handle the IRQ and return > > IRQ_NONE if there is nothing to handle. With the check added > > and the return code properly indicating whether or not it there > > was an IRQ, the IRQF_SHARED can be set to share a GPIO IRQ. > > > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx> > > Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> Gentle nudge on this one. It's been about a month, and without it, it is preventing hot-plug detection on one board for me. Thanks adam > > > --- > > V2: Add check to see if there is IRQ data to handle > > > > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c > > index b5518ff97165..f3b4616a8fb6 100644 > > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c > > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c > > @@ -477,6 +477,11 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd) > > if (ret < 0) > > return ret; > > > > + /* If there is no IRQ to handle, exit indicating no IRQ data */ > > + if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) && > > + !(irq1 & ADV7511_INT1_DDC_ERROR)) > > + return -ENODATA; > > + > > regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0); > > regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1); > > > > @@ -1318,7 +1323,8 @@ static int adv7511_probe(struct i2c_client *i2c) > > > > ret = devm_request_threaded_irq(dev, i2c->irq, NULL, > > adv7511_irq_handler, > > - IRQF_ONESHOT, dev_name(dev), > > + IRQF_ONESHOT | IRQF_SHARED, > > + dev_name(dev), > > adv7511); > > if (ret) > > goto err_unregister_audio; > > -- > Regards, > > Laurent Pinchart