On 24-04-04, Laurent Pinchart wrote: > From: Jacopo Mondi <jacopo@xxxxxxxxxx> > > The I2C2 bus is used for the CSI and DSI connectors only, no devices are > connected to it on neither the Debix Model A nor its IO board. Disable > the bus in the board's .dts and remove its clock frequency settings, as > the value depends solely on the devices conncted to the CSI and DSI > connectors. Display panel or camera sensor overlays will configure and > enable the bus when necessary. > > Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Reviewed-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
