[PATCH v5 09/10] mailbox: mediatek: Add secure CMDQ driver support for CMDQ driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>

CMDQ driver will probe a secure CMDQ driver when has_sec flag
in platform data is true and its device node in dts has defined a
event id of CMDQ_SYNC_TOKEN_SEC_EOF.

Secure CMDQ driver support on mt8188 and mt8195 currently.
So add a has_secure flag to their driver data to probe it.

Signed-off-by: Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>
Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 69 +++++++++++++++++++++++++++++-
 1 file changed, 68 insertions(+), 1 deletion(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index e04302ca6ec03..a51140404d116 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -15,8 +15,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/mailbox_controller.h>
 #include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/mailbox/mtk-cmdq-sec-mailbox.h>
 #include <linux/of.h>
-
 #define CMDQ_MBOX_AUTOSUSPEND_DELAY_MS	100
 
 #define CMDQ_OP_CODE_MASK		(0xff << CMDQ_OP_CODE_SHIFT)
@@ -55,11 +55,19 @@
 #define CMDQ_JUMP_BY_OFFSET		0x10000000
 #define CMDQ_JUMP_BY_PA			0x10000001
 
+#define CMDQ_IS_SECURE_THREAD(idx, cmdq) (cmdq->pdata->has_secure && \
+					  idx >= cmdq->pdata->secure_thread_min && \
+					  idx < cmdq->pdata->secure_thread_min + \
+					  cmdq->pdata->secure_thread_nr)
+
 struct gce_plat {
 	u32 thread_nr;
 	u8 shift;
 	bool control_by_sw;
 	bool sw_ddr_en;
+	bool has_secure;
+	u32 secure_thread_nr;
+	u32 secure_thread_min;
 	u32 gce_num;
 };
 
@@ -377,6 +385,13 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
 	if (ret < 0)
 		return ret;
 
+	if (CMDQ_IS_SECURE_THREAD(thread->idx, cmdq)) {
+		ret = cmdq_sec_mbox.ops->send_data(chan, data);
+		pm_runtime_mark_last_busy(cmdq->mbox.dev);
+		pm_runtime_put_autosuspend(cmdq->mbox.dev);
+		return ret;
+	}
+
 	task = kzalloc(sizeof(*task), GFP_ATOMIC);
 	if (!task) {
 		pm_runtime_put_autosuspend(cmdq->mbox.dev);
@@ -436,6 +451,12 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
 
 static int cmdq_mbox_startup(struct mbox_chan *chan)
 {
+	struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev);
+	struct cmdq_thread *thread = (struct cmdq_thread *)chan->con_priv;
+
+	if (CMDQ_IS_SECURE_THREAD(thread->idx, cmdq))
+		cmdq_sec_mbox.ops->startup(chan);
+
 	return 0;
 }
 
@@ -448,6 +469,13 @@ static void cmdq_mbox_shutdown(struct mbox_chan *chan)
 
 	WARN_ON(pm_runtime_get_sync(cmdq->mbox.dev));
 
+	if (CMDQ_IS_SECURE_THREAD(thread->idx, cmdq)) {
+		cmdq_sec_mbox.ops->shutdown(chan);
+		pm_runtime_mark_last_busy(cmdq->mbox.dev);
+		pm_runtime_put_autosuspend(cmdq->mbox.dev);
+		return;
+	}
+
 	spin_lock_irqsave(&thread->chan->lock, flags);
 	if (list_empty(&thread->task_busy_list))
 		goto done;
@@ -494,6 +522,13 @@ static int cmdq_mbox_flush(struct mbox_chan *chan, unsigned long timeout)
 	if (ret < 0)
 		return ret;
 
+	if (CMDQ_IS_SECURE_THREAD(thread->idx, cmdq)) {
+		cmdq_sec_mbox.ops->flush(chan, timeout);
+		pm_runtime_mark_last_busy(cmdq->mbox.dev);
+		pm_runtime_put_autosuspend(cmdq->mbox.dev);
+		return 0;
+	}
+
 	spin_lock_irqsave(&thread->chan->lock, flags);
 	if (list_empty(&thread->task_busy_list))
 		goto out;
@@ -569,6 +604,7 @@ static int cmdq_probe(struct platform_device *pdev)
 	int alias_id = 0;
 	static const char * const clk_name = "gce";
 	static const char * const clk_names[] = { "gce0", "gce1" };
+	u32 hwid = 0;
 
 	cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL);
 	if (!cmdq)
@@ -594,6 +630,8 @@ static int cmdq_probe(struct platform_device *pdev)
 		dev, cmdq->base, cmdq->irq);
 
 	if (cmdq->pdata->gce_num > 1) {
+		hwid = of_alias_get_id(dev->of_node, clk_name);
+
 		for_each_child_of_node(phandle->parent, node) {
 			alias_id = of_alias_get_id(node, clk_name);
 			if (alias_id >= 0 && alias_id < cmdq->pdata->gce_num) {
@@ -643,6 +681,29 @@ static int cmdq_probe(struct platform_device *pdev)
 		cmdq->mbox.chans[i].con_priv = (void *)&cmdq->thread[i];
 	}
 
+	if (cmdq->pdata->has_secure) {
+		struct platform_device *cmdq_sec;
+		static struct gce_sec_plat sec_plat = {0};
+
+		if (of_property_read_u32_index(dev->of_node, "mediatek,gce-events", 0,
+					       &sec_plat.cmdq_event) == 0) {
+			sec_plat.mbox = &cmdq->mbox;
+			sec_plat.base = cmdq->base;
+			sec_plat.hwid = hwid;
+			sec_plat.secure_thread_nr = cmdq->pdata->secure_thread_nr;
+			sec_plat.secure_thread_min = cmdq->pdata->secure_thread_min;
+
+			cmdq_sec = platform_device_register_data(dev, "mtk-cmdq-sec",
+								 PLATFORM_DEVID_AUTO,
+								 &sec_plat,
+								 sizeof(sec_plat));
+			if (IS_ERR(cmdq_sec)) {
+				dev_err(dev, "failed to register platform_device mtk-cmdq-sec\n");
+				return PTR_ERR(cmdq_sec);
+			}
+		}
+	}
+
 	err = devm_mbox_controller_register(dev, &cmdq->mbox);
 	if (err < 0) {
 		dev_err(dev, "failed to register mailbox: %d\n", err);
@@ -719,6 +780,9 @@ static const struct gce_plat gce_plat_mt8188 = {
 	.thread_nr = 32,
 	.shift = 3,
 	.control_by_sw = true,
+	.has_secure = true,
+	.secure_thread_nr = 2,
+	.secure_thread_min = 8,
 	.gce_num = 2
 };
 
@@ -733,6 +797,9 @@ static const struct gce_plat gce_plat_mt8195 = {
 	.thread_nr = 24,
 	.shift = 3,
 	.control_by_sw = true,
+	.has_secure = true,
+	.secure_thread_nr = 2,
+	.secure_thread_min = 8,
 	.gce_num = 2
 };
 
-- 
2.18.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux