From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
Add cmdq_pkt_write_s_reg_value to support write a value to a register.
It appends write_s command to the command buffer in a CMDQ packet,
ask GCE to excute a write instruction to write a value to a register
with low 16 bits physical address offset.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>
Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 13 +++++++++++++
include/linux/soc/mediatek/mtk-cmdq.h | 11 +++++++++++
2 files changed, 24 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 72350138591c3..42a0194198d5b 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -292,6 +292,19 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
}
EXPORT_SYMBOL(cmdq_pkt_write_s_value);
+int cmdq_pkt_write_s_reg_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u32 value)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_WRITE_S;
+ inst.dst_t = CMDQ_REG_TYPE;
+ inst.reg_dst = high_addr_reg_idx;
+ inst.value = value;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_reg_value);
+
int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
u16 addr_low, u32 value, u32 mask)
{
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 1edb391ec604a..7bd77d40a5720 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -207,6 +207,17 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
u16 addr_low, u32 value, u32 mask);
+/**
+ * cmdq_pkt_write_s_reg_value() - append write_s command to the CMDQ packet which
+ * write value to a register with low address pa
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @value: the specified target value
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_reg_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u32 value);
+
/**
* cmdq_pkt_mem_move() - append memory move command to the CMDQ packet
* @pkt: the CMDQ packet
--
2.18.0
