Re: [Patch v3 0/6] GSBI CRCI Autoconfiguration Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Feb 10, 2015 at 11:57:27AM -0600, Kumar Gala wrote:
> 
> On Feb 9, 2015, at 4:01 PM, Andy Gross <agross@xxxxxxxxxxxxxx> wrote:
> 
> > This patch set adds support for automatic configuration of GSBI DMA CRCI values.
> > 
> > DMA operations require that the ADM CRCI mux values be properly configured in
> > the TCSR (Top Control and Status Register) block.  During probing of a GSBI
> > device, the client mode must be declared and this can be used to lookup the
> > correct TCSR ADM CRCI MUX settings and then program them so that they are
> > correct before any clients are populated.
> > 
> > These patches add the TCSR as a syscon device and that allows the GSBI to
> > access and manipulate the ADM CRCI MUX registers to correctly configure the
> > values based on the GSBI port configuration.
> > 
> > Changes since v2:
> >  - Use cell-index instead of alias to denote GSBI instance
> > 
> > Changes since v1:
> >  - Fixed various review comments
> > 
> > Andy Gross (6):
> >  soc: qcom: gsbi: Add support for ADM CRCI muxing
> >  mfd: qcom,tcsr: Add device tree binding for TCSR
> >  ARM: DT: apq8064: Add TCSR support
> >  ARM: DT: ipq8064: Add TCSR support
> >  ARM: DT: msm8660: Add TCSR support
> >  ARM: DT: msm8960: Add TCSR support
> > 
> > .../devicetree/bindings/mfd/qcom,tcsr.txt          |   22 +++
> > .../devicetree/bindings/soc/qcom/qcom,gsbi.txt     |   14 +-
> > arch/arm/boot/dts/qcom-apq8064.dtsi                |   14 ++
> > arch/arm/boot/dts/qcom-ipq8064.dtsi                |   14 ++
> > arch/arm/boot/dts/qcom-msm8660.dtsi                |    8 ++
> > arch/arm/boot/dts/qcom-msm8960.dtsi                |    8 ++
> > drivers/soc/qcom/Kconfig                           |    1 +
> > drivers/soc/qcom/qcom_gsbi.c                       |  152 ++++++++++++++++++++
> > 8 files changed, 232 insertions(+), 1 deletion(-)
> > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
> 
> Series looks good, do we need a qcom_defconfig update to enable anything new for this?
> 
> - k

I'll send a followup to enable qcom_defconfig.

-- 
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux