From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx> There are 2 kind of GCE event signal: - The SW token means: a GCE event signal triggered by SW drivers. e.g. SW driver append a GCE command to set a GCE event after a specific GCE command. Or SW driver use CPU to write a event id to GCE register to trigger the GCE event corresponding to that event id. - The HW event means: a GCE event signal triggered by HW engines. e.g. When HW OVL fetches all the data in frame buffer, HW OVL will send a frame done irq and also send a frame done GCE event via HW bus directly. CMDQ_SYNC_TOKEN_SECURE_THR_EOF is a SW token event that is set in the end of each cmdq secure pkt. It is used as a secure irq to notify CMDQ driver in the normal world that GCE secure thread has completed a secure cmd buffer in thee secure world. Signed-off-by: Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx> Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx> --- include/dt-bindings/gce/mt8195-gce.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/dt-bindings/gce/mt8195-gce.h b/include/dt-bindings/gce/mt8195-gce.h index dcfb302b8a5bc..b6b3db82c381e 100644 --- a/include/dt-bindings/gce/mt8195-gce.h +++ b/include/dt-bindings/gce/mt8195-gce.h @@ -800,6 +800,12 @@ #define CMDQ_EVENT_WPE_VPP1_WPE_GCE_FRAME_DONE 969 #define CMDQ_EVENT_WPE_VPP1_WPE_DONE_SYNC_OUT 970 +/* + * Notify normal CMDQ there are some secure task done, + * this token sync with secure world. + */ +#define CMDQ_SYNC_TOKEN_SECURE_THR_EOF 980 + #define CMDQ_EVENT_DP_TX_VBLANK_FALLING 994 #define CMDQ_EVENT_DP_TX_VSC_FINISH 995 -- 2.18.0
