Re: [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 02, 2024 at 11:09:29PM +0200, Marijn Suijten wrote:
> On 2024-04-02 02:51:14, Dmitry Baryshkov wrote:
> > Add the extended version of mipi_dsi_compression_mode(). It provides
> > a way to specify the algorithm and PPS selector.
> > 
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/drm_mipi_dsi.c | 33 +++++++++++++++++++++++++++------
> >  include/drm/drm_mipi_dsi.h     |  9 +++++++++
> >  2 files changed, 36 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
> > index 9874ff6d4718..0ecbc811eb7a 100644
> > --- a/drivers/gpu/drm/drm_mipi_dsi.c
> > +++ b/drivers/gpu/drm/drm_mipi_dsi.c
> > @@ -645,19 +645,24 @@ int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
> >  EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
> >  
> >  /**
> > - * mipi_dsi_compression_mode() - enable/disable DSC on the peripheral
> > + * mipi_dsi_compression_mode_ext() - enable/disable DSC on the peripheral
> >   * @dsi: DSI peripheral device
> >   * @enable: Whether to enable or disable the DSC
> > + * @algo: Selected algorithm
> > + * @pps_selector: The PPS selector
> 
> Not a big fan of paraphrasing the parameter name, it adds no value.  How about
> describing what this parameter means and what it does?:
> 
> 	PPS table index to use.  Corresponds to a table pre-programmed on the peripheral
> 	or a table programmed with &drm_dsc_picture_parameter_set.pps_identifier.
> 
> (That should be a valid kernel-doc cross-reference to the field)

I don't think such meaning is defined in the standard. In the end, the
pps_identifier is 8-bit wide, while this field has just 2 bits and 4
possible values. The standards are pretty vague about this field. 

> 
> >   *
> > - * Enable or disable Display Stream Compression on the peripheral using the
> > - * default Picture Parameter Set and VESA DSC 1.1 algorithm.
> > + * Enable or disable Display Stream Compression on the peripheral.
> >   *
> >   * Return: 0 on success or a negative error code on failure.
> >   */
> > -int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
> > +int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable,
> > +				  enum mipi_dsi_compression_algo algo,
> > +				  unsigned int pps_selector)
> >  {
> > -	/* Note: Needs updating for non-default PPS or algorithm */
> > -	u8 tx[2] = { enable << 0, 0 };
> > +	u8 data = (enable << 0) |
> > +		(algo << 1) |
> > +		(pps_selector << 4);
> 
> Do we need some size validation (if > 3 return -EINVAL)?  FIELD_PREP() might be
> too heavy though.

Ack, let's add it.

> 
> > +	u8 tx[2] = { data, 0 };
> >  	struct mipi_dsi_msg msg = {
> >  		.channel = dsi->channel,
> >  		.type = MIPI_DSI_COMPRESSION_MODE,
> > @@ -668,6 +673,22 @@ int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
> >  
> >  	return (ret < 0) ? ret : 0;
> >  }
> > +EXPORT_SYMBOL(mipi_dsi_compression_mode_ext);
> > +
> > +/**
> > + * mipi_dsi_compression_mode() - enable/disable DSC on the peripheral
> > + * @dsi: DSI peripheral device
> > + * @enable: Whether to enable or disable the DSC
> > + *
> > + * Enable or disable Display Stream Compression on the peripheral using the
> > + * default Picture Parameter Set and VESA DSC 1.1 algorithm.
> > + *
> > + * Return: 0 on success or a negative error code on failure.
> > + */
> > +int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
> > +{
> > +	return mipi_dsi_compression_mode_ext(dsi, enable, 0, MIPI_DSI_COMPRESSION_DSC);
> 
> I hope the compiler complains here that it should be MIPI_DSI_COMPRESSION_DSC,0

Nope, it didn't. Both are integers.

> 
> (Enum algo first, int pps_selector last)
> 
> > +}
> >  EXPORT_SYMBOL(mipi_dsi_compression_mode);
> >  
> >  /**
> > diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
> > index 3011d33eccbd..78cb7b688b1d 100644
> > --- a/include/drm/drm_mipi_dsi.h
> > +++ b/include/drm/drm_mipi_dsi.h
> > @@ -226,6 +226,12 @@ static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
> >  	return -EINVAL;
> >  }
> >  
> > +enum mipi_dsi_compression_algo {
> > +	MIPI_DSI_COMPRESSION_DSC = 0,
> 
> Add 1.1?  Or does it also allow 1.2 (when the version is also set via PPS)?

I have only DSI 1.3 at hand, which only talks about 1.1. I think 1.2 is
allowed by inheritance. That's why I skipped the version here.

> 
> > +	MIPI_DSI_COMPRESSION_VENDOR = 3,
> > +	/* other two values are reserved, DSI 1.3 */
> > +};
> > +
> >  struct mipi_dsi_device *
> >  mipi_dsi_device_register_full(struct mipi_dsi_host *host,
> >  			      const struct mipi_dsi_device_info *info);
> > @@ -242,6 +248,9 @@ int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
> >  int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
> >  					    u16 value);
> >  int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable);
> > +int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable,
> > +				  unsigned int pps_selector,
> > +				  enum mipi_dsi_compression_algo algo);
> 
> Oh, this declaration is inverse from the definition...

I'll check it.

> 
> - Marijn
> 
> >  int mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi,
> >  				   const struct drm_dsc_picture_parameter_set *pps);
> >  
> > 
> > -- 
> > 2.39.2
> > 

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux