Hello Jerome,
On Tue, Apr 02, 2024 at 11:35:49AM +0200, Jerome Brunet wrote:
>
> On Fri 29 Mar 2024 at 23:58, Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx> wrote:
>
> > The CPU clock controller plays a general role in the Amlogic A1 SoC
> > family by generating CPU clocks. As an APB slave module, it offers the
> > capability to inherit the CPU clock from two sources: the internal fixed
> > clock known as 'cpu fixed clock' and the external input provided by the
> > A1 PLL clock controller, referred to as 'syspll'.
> >
> > It is important for the driver to handle cpu_clk rate switching
> > effectively by transitioning to the CPU fixed clock to avoid any
> > potential execution freezes.
> >
> > Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
> > ---
> > drivers/clk/meson/Kconfig | 10 ++
> > drivers/clk/meson/Makefile | 1 +
> > drivers/clk/meson/a1-cpu.c | 324 +++++++++++++++++++++++++++++++++++++
> > drivers/clk/meson/a1-cpu.h | 16 ++
> > 4 files changed, 351 insertions(+)
> > create mode 100644 drivers/clk/meson/a1-cpu.c
> > create mode 100644 drivers/clk/meson/a1-cpu.h
> >
> > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> > index 80c4a18c83d2..148d4495eee3 100644
> > --- a/drivers/clk/meson/Kconfig
> > +++ b/drivers/clk/meson/Kconfig
> > @@ -111,6 +111,16 @@ config COMMON_CLK_AXG_AUDIO
> > Support for the audio clock controller on AmLogic A113D devices,
> > aka axg, Say Y if you want audio subsystem to work.
> >
> > +config COMMON_CLK_A1_CPU
> > + tristate "Amlogic A1 SoC CPU controller support"
> > + depends on ARM64
> > + select COMMON_CLK_MESON_REGMAP
> > + select COMMON_CLK_MESON_CLKC_UTILS
> > + help
> > + Support for the CPU clock controller on Amlogic A113L based
> > + device, A1 SoC Family. Say Y if you want A1 CPU clock controller
> > + to work.
> > +
> > config COMMON_CLK_A1_PLL
> > tristate "Amlogic A1 SoC PLL controller support"
> > depends on ARM64
> > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> > index 4968fc7ad555..2a06eb0303d6 100644
> > --- a/drivers/clk/meson/Makefile
> > +++ b/drivers/clk/meson/Makefile
> > @@ -18,6 +18,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_AUDIO_RSTC) += meson-audio-rstc.o
> >
> > obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
> > obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
> > +obj-$(CONFIG_COMMON_CLK_A1_CPU) += a1-cpu.o
> > obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
> > obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
> > obj-$(CONFIG_COMMON_CLK_A1_AUDIO) += a1-audio.o
> > diff --git a/drivers/clk/meson/a1-cpu.c b/drivers/clk/meson/a1-cpu.c
> > new file mode 100644
> > index 000000000000..5f5d8ae112e5
> > --- /dev/null
> > +++ b/drivers/clk/meson/a1-cpu.c
> > @@ -0,0 +1,324 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Amlogic A1 SoC family CPU Clock Controller driver.
> > + *
> > + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
> > + * Author: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/platform_device.h>
> > +#include "a1-cpu.h"
> > +#include "clk-regmap.h"
> > +#include "meson-clkc-utils.h"
> > +
> > +#include <dt-bindings/clock/amlogic,a1-cpu-clkc.h>
> > +
> > +static u32 cpu_fsource_sel_table[] = { 0, 1, 2 };
> > +static const struct clk_parent_data cpu_fsource_sel_parents[] = {
> > + { .fw_name = "xtal" },
> > + { .fw_name = "fclk_div2" },
> > + { .fw_name = "fclk_div3" },
> > +};
> > +
> > +static struct clk_regmap cpu_fsource_sel0 = {
> > + .data = &(struct clk_regmap_mux_data) {
> > + .offset = CPUCTRL_CLK_CTRL0,
> > + .mask = 0x3,
> > + .shift = 0,
> > + .table = cpu_fsource_sel_table,
> > + },
> > + .hw.init = &(struct clk_init_data) {
> > + .name = "cpu_fsource_sel0",
> > + .ops = &clk_regmap_mux_ops,
> > + .parent_data = cpu_fsource_sel_parents,
> > + .num_parents = ARRAY_SIZE(cpu_fsource_sel_parents),
> > + .flags = CLK_SET_RATE_PARENT,
> > + },
> > +};
> > +
> > +static struct clk_regmap cpu_fsource_div0 = {
> > + .data = &(struct clk_regmap_div_data) {
> > + .offset = CPUCTRL_CLK_CTRL0,
> > + .shift = 4,
> > + .width = 6,
> > + },
> > + .hw.init = &(struct clk_init_data) {
> > + .name = "cpu_fsource_div0",
> > + .ops = &clk_regmap_divider_ops,
> > + .parent_hws = (const struct clk_hw *[]) {
> > + &cpu_fsource_sel0.hw
> > + },
> > + .num_parents = 1,
> > + .flags = CLK_SET_RATE_PARENT,
> > + },
> > +};
> > +
> > +static struct clk_regmap cpu_fsel0 = {
> > + .data = &(struct clk_regmap_mux_data) {
> > + .offset = CPUCTRL_CLK_CTRL0,
> > + .mask = 0x1,
> > + .shift = 2,
> > + },
> > + .hw.init = &(struct clk_init_data) {
> > + .name = "cpu_fsel0",
> > + .ops = &clk_regmap_mux_ops,
> > + .parent_hws = (const struct clk_hw *[]) {
> > + &cpu_fsource_sel0.hw,
> > + &cpu_fsource_div0.hw,
> > + },
> > + .num_parents = 2,
> > + .flags = CLK_SET_RATE_PARENT,
> > + },
> > +};
> > +
> > +static struct clk_regmap cpu_fsource_sel1 = {
> > + .data = &(struct clk_regmap_mux_data) {
> > + .offset = CPUCTRL_CLK_CTRL0,
> > + .mask = 0x3,
> > + .shift = 16,
> > + .table = cpu_fsource_sel_table,
> > + },
> > + .hw.init = &(struct clk_init_data) {
> > + .name = "cpu_fsource_sel1",
> > + .ops = &clk_regmap_mux_ops,
> > + .parent_data = cpu_fsource_sel_parents,
> > + .num_parents = ARRAY_SIZE(cpu_fsource_sel_parents),
> > + .flags = CLK_SET_RATE_PARENT,
> > + },
> > +};
> > +
> > +static struct clk_regmap cpu_fsource_div1 = {
> > + .data = &(struct clk_regmap_div_data) {
> > + .offset = CPUCTRL_CLK_CTRL0,
> > + .shift = 20,
> > + .width = 6,
> > + },
> > + .hw.init = &(struct clk_init_data) {
> > + .name = "cpu_fsource_div1",
> > + .ops = &clk_regmap_divider_ops,
> > + .parent_hws = (const struct clk_hw *[]) {
> > + &cpu_fsource_sel1.hw
> > + },
> > + .num_parents = 1,
> > + .flags = CLK_SET_RATE_PARENT,
> > + },
> > +};
> > +
> > +static struct clk_regmap cpu_fsel1 = {
> > + .data = &(struct clk_regmap_mux_data) {
> > + .offset = CPUCTRL_CLK_CTRL0,
> > + .mask = 0x1,
> > + .shift = 18,
> > + },
> > + .hw.init = &(struct clk_init_data) {
> > + .name = "cpu_fsel1",
> > + .ops = &clk_regmap_mux_ops,
> > + .parent_hws = (const struct clk_hw *[]) {
> > + &cpu_fsource_sel1.hw,
> > + &cpu_fsource_div1.hw,
> > + },
> > + .num_parents = 2,
> > + .flags = CLK_SET_RATE_PARENT,
> > + },
> > +};
> > +
> > +static struct clk_regmap cpu_fclk = {
> > + .data = &(struct clk_regmap_mux_data) {
> > + .offset = CPUCTRL_CLK_CTRL0,
> > + .mask = 0x1,
> > + .shift = 10,
> > + },
> > + .hw.init = &(struct clk_init_data) {
> > + .name = "cpu_fclk",
> > + .ops = &clk_regmap_mux_ops,
> > + .parent_hws = (const struct clk_hw *[]) {
> > + &cpu_fsel0.hw,
> > + &cpu_fsel1.hw,
> > + },
> > + .num_parents = 2,
> > + .flags = CLK_SET_RATE_PARENT,
> > + },
> > +};
> > +
> > +static struct clk_regmap cpu_clk = {
> > + .data = &(struct clk_regmap_mux_data) {
> > + .offset = CPUCTRL_CLK_CTRL0,
> > + .mask = 0x1,
> > + .shift = 11,
> > + },
> > + .hw.init = &(struct clk_init_data) {
> > + .name = "cpu_clk",
> > + .ops = &clk_regmap_mux_ops,
> > + .parent_data = (const struct clk_parent_data []) {
> > + { .hw = &cpu_fclk.hw },
> > + { .fw_name = "sys_pll", },
> > + },
> > + .num_parents = 2,
> > + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > + },
> > +};
> > +
> > +/* Array of all clocks registered by this provider */
> > +static struct clk_hw *a1_cpu_hw_clks[] = {
> > + [CLKID_CPU_FSOURCE_SEL0] = &cpu_fsource_sel0.hw,
> > + [CLKID_CPU_FSOURCE_DIV0] = &cpu_fsource_div0.hw,
> > + [CLKID_CPU_FSEL0] = &cpu_fsel0.hw,
> > + [CLKID_CPU_FSOURCE_SEL1] = &cpu_fsource_sel1.hw,
> > + [CLKID_CPU_FSOURCE_DIV1] = &cpu_fsource_div1.hw,
> > + [CLKID_CPU_FSEL1] = &cpu_fsel1.hw,
> > + [CLKID_CPU_FCLK] = &cpu_fclk.hw,
> > + [CLKID_CPU_CLK] = &cpu_clk.hw,
> > +};
> > +
> > +static struct clk_regmap *const a1_cpu_regmaps[] = {
> > + &cpu_fsource_sel0,
> > + &cpu_fsource_div0,
> > + &cpu_fsel0,
> > + &cpu_fsource_sel1,
> > + &cpu_fsource_div1,
> > + &cpu_fsel1,
> > + &cpu_fclk,
> > + &cpu_clk,
> > +};
> > +
> > +static struct regmap_config a1_cpu_regmap_cfg = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = 4,
> > + .max_register = CPUCTRL_CLK_CTRL1,
> > +};
> > +
> > +static struct meson_clk_hw_data a1_cpu_clks = {
> > + .hws = a1_cpu_hw_clks,
> > + .num = ARRAY_SIZE(a1_cpu_hw_clks),
> > +};
> > +
> > +struct a1_cpu_clk_nb_data {
> > + const struct clk_ops *mux_ops;
>
> That's fishy ...
>
> > + struct clk_hw *cpu_clk;
> > + struct notifier_block nb;
> > + u8 parent;
> > +};
> > +
> > +#define MESON_A1_CPU_CLK_GET_PARENT(nbd) \
> > + ((nbd)->mux_ops->get_parent((nbd)->cpu_clk))
> > +#define MESON_A1_CPU_CLK_SET_PARENT(nbd, index) \
> > + ((nbd)->mux_ops->set_parent((nbd)->cpu_clk, index))
>
> ... Directly going for the mux ops ??!?? No way !
>
> We have a framework to handle the clocks, the whole point is to use it,
> not bypass it !
>
I suppose you understand my approach, which is quite similar to what is
happening in the Mediatek driver:
https://elixir.bootlin.com/linux/latest/source/drivers/clk/mediatek/clk-mux.c#L295
Initially, I attempted to set the parent using the clk_set_parent() API.
However, I encountered a problem with recursive calling of the
notifier_block. This issue arises because the parent triggers
notifications for its children, leading to repeated calls to the
notifier_block.
I find it puzzling why I cannot call an internal function or callback
within the internal driver context. After all, the notifier block is
just a part of the set_rate() flow. From a global Clock Control
Framework perspective, the context should not change.
> > +
> > +static int meson_a1_cpu_clk_notifier_cb(struct notifier_block *nb,
> > + unsigned long event, void *data)
> > +{
> > + struct a1_cpu_clk_nb_data *nbd;
> > + int ret = 0;
> > +
> > + nbd = container_of(nb, struct a1_cpu_clk_nb_data, nb);
> > +
> > + switch (event) {
> > + case PRE_RATE_CHANGE:
> > + nbd->parent = MESON_A1_CPU_CLK_GET_PARENT(nbd);
> > + /* Fallback to the CPU fixed clock */
> > + ret = MESON_A1_CPU_CLK_SET_PARENT(nbd, 0);
> > + /* Wait for clock propagation */
> > + udelay(100);
> > + break;
> > +
> > + case POST_RATE_CHANGE:
> > + case ABORT_RATE_CHANGE:
> > + /* Back to the original parent clock */
> > + ret = MESON_A1_CPU_CLK_SET_PARENT(nbd, nbd->parent);
> > + /* Wait for clock propagation */
> > + udelay(100);
> > + break;
> > +
> > + default:
> > + pr_warn("Unknown event %lu for %s notifier block\n",
> > + event, clk_hw_get_name(nbd->cpu_clk));
> > + break;
> > + }
> > +
> > + return notifier_from_errno(ret);
> > +}
> > +
> > +static struct a1_cpu_clk_nb_data a1_cpu_clk_nb_data = {
> > + .mux_ops = &clk_regmap_mux_ops,
> > + .cpu_clk = &cpu_clk.hw,
> > + .nb.notifier_call = meson_a1_cpu_clk_notifier_cb,
> > +};
> > +
> > +static int meson_a1_dvfs_setup(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct clk *notifier_clk;
> > + int ret;
> > +
> > + /* Setup clock notifier for cpu_clk */
> > + notifier_clk = devm_clk_hw_get_clk(dev, &cpu_clk.hw, "dvfs");
> > + if (IS_ERR(notifier_clk))
> > + return dev_err_probe(dev, PTR_ERR(notifier_clk),
> > + "can't get cpu_clk as notifier clock\n");
> > +
> > + ret = devm_clk_notifier_register(dev, notifier_clk,
> > + &a1_cpu_clk_nb_data.nb);
> > + if (ret)
> > + return dev_err_probe(dev, ret,
> > + "can't register cpu_clk notifier\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int meson_a1_cpu_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + void __iomem *base;
> > + struct regmap *map;
> > + int clkid, i, err;
> > +
> > + base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(base))
> > + return dev_err_probe(dev, PTR_ERR(base),
> > + "can't ioremap resource\n");
> > +
> > + map = devm_regmap_init_mmio(dev, base, &a1_cpu_regmap_cfg);
> > + if (IS_ERR(map))
> > + return dev_err_probe(dev, PTR_ERR(map),
> > + "can't init regmap mmio region\n");
> > +
> > + /* Populate regmap for the regmap backed clocks */
> > + for (i = 0; i < ARRAY_SIZE(a1_cpu_regmaps); i++)
> > + a1_cpu_regmaps[i]->map = map;
> > +
> > + for (clkid = 0; clkid < a1_cpu_clks.num; clkid++) {
> > + err = devm_clk_hw_register(dev, a1_cpu_clks.hws[clkid]);
> > + if (err)
> > + return dev_err_probe(dev, err,
> > + "clock[%d] registration failed\n",
> > + clkid);
> > + }
> > +
> > + err = devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, &a1_cpu_clks);
> > + if (err)
> > + return dev_err_probe(dev, err, "can't add clk hw provider\n");
>
> I wonder if there is a window of opportunity to poke the syspll without
> your notifier here. That being said, the situation would be similar on g12.
>
Yes, I have taken into account what you did in the G12A CPU clock
relations. My thoughts were that it might not be applicable for the A1
case. This is because the sys_pll should be located in a different
driver from a logical perspective. Consequently, we cannot configure the
sys_pll notifier block to manage the cpu_clk from a different driver.
However, if I were to move the sys_pll clock object to the A1 CPU clock
controller, I believe the g12a sys_pll notifier approach would work.
> > +
> > + return meson_a1_dvfs_setup(pdev);
>
>
>
> > +}
> > +
> > +static const struct of_device_id a1_cpu_clkc_match_table[] = {
> > + { .compatible = "amlogic,a1-cpu-clkc", },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, a1_cpu_clkc_match_table);
> > +
> > +static struct platform_driver a1_cpu_clkc_driver = {
> > + .probe = meson_a1_cpu_probe,
> > + .driver = {
> > + .name = "a1-cpu-clkc",
> > + .of_match_table = a1_cpu_clkc_match_table,
> > + },
> > +};
> > +
> > +module_platform_driver(a1_cpu_clkc_driver);
> > +MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/clk/meson/a1-cpu.h b/drivers/clk/meson/a1-cpu.h
> > new file mode 100644
> > index 000000000000..e9af4117e26f
> > --- /dev/null
> > +++ b/drivers/clk/meson/a1-cpu.h
>
> There is not point putting the definition here in a header
> These are clearly not going to be shared with another driver.
>
> Please drop this file
>
The same approach was applied to the Peripherals and PLL A1 drivers.
Honestly, I am not a fan of having different file organization within a
single logical code folder.
Please refer to:
drivers/clk/meson/a1-peripherals.h
drivers/clk/meson/a1-pll.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Amlogic A1 CPU Clock Controller internals
> > + *
> > + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
> > + * Author: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
> > + */
> > +
> > +#ifndef __A1_CPU_H
> > +#define __A1_CPU_H
> > +
> > +/* cpu clock controller register offset */
> > +#define CPUCTRL_CLK_CTRL0 0x80
> > +#define CPUCTRL_CLK_CTRL1 0x84
>
> You are claiming the registers from 0x00 to 0x84 (included), but only
> using these 2 registers ? What is the rest ? Are you sure there is only
> clocks in there ?
>
Yes, unfortunately, the register map for this IP is not described in the
A1 Datasheet. The only available information about it can be found in
the vendor clock driver, which provides details for only two registers
used to configure the CPU clock.
>From vendor kernel dtsi:
clkc: clock-controller {
compatible = "amlogic,a1-clkc";
#clock-cells = <1>;
reg = <0x0 0xfe000800 0x0 0x100>,
<0x0 0xfe007c00 0x0 0x21c>,
<0x0 0xfd000000 0x0 0x88>; <==== CPU clock regmap
reg-names = "basic", "pll",
"cpu_clk";
clocks = <&xtal>;
clock-names = "core";
status = "okay";
};
>From vendor clkc driver:
/*
* CPU clok register offset
* APB_BASE: APB1_BASE_ADDR = 0xfd000000
*/
#define CPUCTRL_CLK_CTRL0 0x80
#define CPUCTRL_CLK_CTRL1 0x84
[...]
--
Thank you,
Dmitry
