[PATCH v2 3/4] arm64: dts: qcom: sc8180x: Drop flags for mdss irqs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 99462b42cfc5..6d74867d3b61 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2804,7 +2804,7 @@ mdss_mdp: mdp@ae01000 {
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				ports {
 					#address-cells = <1>;
@@ -2877,7 +2877,7 @@ mdss_dsi0: dsi@ae94000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -2963,7 +2963,7 @@ mdss_dsi1: dsi@ae96000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,

-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux