lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 {
... // Col1 Col2
clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4
<&lsio_bus_clk>, // 3 5
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
<IMX_LPCG_CLK_6>;
};
Col1: index, which exited dts try to get.
Col2: actual index in lpcg driver.
pwm1 {
....
clocks = <&pwm1_lpcg 4>, <&pwm1_lpcg 1>;
^^ ^^
should be:
clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, <&pwm1_lpcg IMX_LPCG_CLK_1>;
};
Arg0 is divided by 4 in lpcg driver, so index 0 and 1 will be get by pwm
driver, which are same as IMX_LPCG_CLK_6 and IMX_LPCG_CLK_1. Even it can
work, but code logic is wrong. Fixed it by use correct indices.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 23fa99b205ea ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3")
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 7e510b21bbac5..764c1a08e3b11 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -25,8 +25,8 @@ lsio_pwm0: pwm@5d000000 {
compatible = "fsl,imx27-pwm";
reg = <0x5d000000 0x10000>;
clock-names = "ipg", "per";
- clocks = <&pwm0_lpcg 4>,
- <&pwm0_lpcg 1>;
+ clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+ <&pwm0_lpcg IMX_LPCG_CLK_1>;
assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;
@@ -38,8 +38,8 @@ lsio_pwm1: pwm@5d010000 {
compatible = "fsl,imx27-pwm";
reg = <0x5d010000 0x10000>;
clock-names = "ipg", "per";
- clocks = <&pwm1_lpcg 4>,
- <&pwm1_lpcg 1>;
+ clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+ <&pwm1_lpcg IMX_LPCG_CLK_1>;
assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;
@@ -51,8 +51,8 @@ lsio_pwm2: pwm@5d020000 {
compatible = "fsl,imx27-pwm";
reg = <0x5d020000 0x10000>;
clock-names = "ipg", "per";
- clocks = <&pwm2_lpcg 4>,
- <&pwm2_lpcg 1>;
+ clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+ <&pwm2_lpcg IMX_LPCG_CLK_1>;
assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;
@@ -64,8 +64,8 @@ lsio_pwm3: pwm@5d030000 {
compatible = "fsl,imx27-pwm";
reg = <0x5d030000 0x10000>;
clock-names = "ipg", "per";
- clocks = <&pwm3_lpcg 4>,
- <&pwm3_lpcg 1>;
+ clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+ <&pwm3_lpcg IMX_LPCG_CLK_1>;
assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;
--
2.34.1
