On 4/1/2024 2:23 PM, André Apitzsch via B4 Relay wrote: > This series introduces a driver for the Silergy SY7802 charge pump used > in the BQ Aquaris M5 and X5 smartphones. > > The implementation is based on information extracted from downstream as > the datasheet provided by a distributor of the hardware didn't include > any information about the i2c register description. > > Signed-off-by: André Apitzsch <git@xxxxxxxxxxx> Is this the right email address? "From" shows devnull+git.apitzsch.eu@xxxxxxxxxx. > --- > Changes in v2: > - bindings: remove unneeded allOf > - bindings: example: move flash-led-controller under i2c node to fix > check error > - Cc to phone-devel > - Link to v1: https://lore.kernel.org/r/20240327-sy7802-v1-0-db74ab32faaf@xxxxxxxxxxx > > --- > André Apitzsch (3): > dt-bindings: leds: Add Silergy SY7802 flash LED > leds: sy7802: Add support for Silergy SY7802 flash LED controller > arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash > > .../devicetree/bindings/leds/silergy,sy7802.yaml | 100 ++++ > .../boot/dts/qcom/msm8939-longcheer-l9100.dts | 26 + > drivers/leds/flash/Kconfig | 11 + > drivers/leds/flash/Makefile | 1 + > drivers/leds/flash/leds-sy7802.c | 532 +++++++++++++++++++++ > 5 files changed, 670 insertions(+) > --- > base-commit: a6bd6c9333397f5a0e2667d4d82fef8c970108f2 > change-id: 20240325-sy7802-f40fc6f56525 > > Best regards, -- ---Trilok Soni