The SuperSpeed signals originate from the DWC3 host controller and then are routed through the Combo QMP PHY, where they are multiplexed with the DisplayPort signals. Add corresponding OF graph link. Reported-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 440bbb89bf8a..cfc07dd9d0ec 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -3917,6 +3917,10 @@ port@0 { port@1 { reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss_out>; + }; }; port@2 { @@ -4195,8 +4199,24 @@ usb_1_dwc3: usb@a600000 { phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_1_dwc3_hs_out: endpoint {}; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss_out: endpoint { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; + }; + }; }; }; }; -- 2.39.2