Group the indio_dev initialization and bus configuration for improved readability. Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx> --- drivers/iio/accel/adxl345_core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c index ff89215e9..e4afc6d2a 100644 --- a/drivers/iio/accel/adxl345_core.c +++ b/drivers/iio/accel/adxl345_core.c @@ -229,18 +229,18 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap) if (!data->info) return -ENODEV; - /* Enable full-resolution mode */ - ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT, - data_format_mask, ADXL345_DATA_FORMAT_FULL_RES); - if (ret) - return dev_err_probe(dev, ret, "Failed to set data range\n"); - indio_dev->name = data->info->name; indio_dev->info = &adxl345_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = adxl345_channels; indio_dev->num_channels = ARRAY_SIZE(adxl345_channels); + /* Enable full-resolution mode */ + ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT, + data_format_mask, ADXL345_DATA_FORMAT_FULL_RES); + if (ret) + return dev_err_probe(dev, ret, "Failed to set data range\n"); + /* Enable measurement mode */ ret = adxl345_powerup(data->regmap); if (ret < 0) -- 2.25.1