The children of I2C mux should be named "i2c", according to DT schema
and bindings, and they should have unit address.
This fixes dtbs_check warnings like:
sparx5_pcb135.dtb: i2c0-imux@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c_sfp1', 'i2c_sfp2', 'i2c_sfp3', 'i2c_sfp4' were unexpected)
and dtc W=1 warnings:
sparx5_pcb135_board.dtsi:172.23-180.4: Warning (simple_bus_reg): /axi@600000000/sfp-eth60: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index 82ce007d9959..bf51a6e11cf1 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -146,22 +146,22 @@ &i2c0_imux {
pinctrl-2 = <&i2cmux_s31>;
pinctrl-3 = <&i2cmux_s32>;
pinctrl-4 = <&i2cmux_pins_i>;
- i2c_sfp1: i2c_sfp1 {
+ i2c_sfp1: i2c@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp2: i2c_sfp2 {
+ i2c_sfp2: i2c@1 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp3: i2c_sfp3 {
+ i2c_sfp3: i2c@2 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp4: i2c_sfp4 {
+ i2c_sfp4: i2c@3 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
