GPIO keys are properties of a board, not SoC, because SoC physically does not have any keys or buttons. This also fixes dtc W=1 build warning: sc9860.dtsi:688.13-714.5: Warning (simple_bus_reg): /soc/gpio-keys: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- arch/arm64/boot/dts/sprd/sc9860.dtsi | 28 ----------------------- arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 28 +++++++++++++++++++++++ 2 files changed, 28 insertions(+), 28 deletions(-) diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index b933979c9eee..e875dc8e3d98 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -684,33 +684,5 @@ etm7_out: endpoint { }; }; }; - - gpio-keys { - compatible = "gpio-keys"; - - key-volumedown { - label = "Volume Down Key"; - linux,code = <KEY_VOLUMEDOWN>; - gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>; - debounce-interval = <2>; - wakeup-source; - }; - - key-volumeup { - label = "Volume Up Key"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>; - debounce-interval = <2>; - wakeup-source; - }; - - key-power { - label = "Power Key"; - linux,code = <KEY_POWER>; - gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>; - debounce-interval = <2>; - wakeup-source; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts index 6b95fd94cee3..9b4128d9c5bb 100644 --- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts @@ -34,6 +34,34 @@ chosen { stdout-path = "serial1:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + key-volumedown { + label = "Volume Down Key"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>; + debounce-interval = <2>; + wakeup-source; + }; + + key-volumeup { + label = "Volume Up Key"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>; + debounce-interval = <2>; + wakeup-source; + }; + + key-power { + label = "Power Key"; + linux,code = <KEY_POWER>; + gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>; + debounce-interval = <2>; + wakeup-source; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; -- 2.34.1