> -----Original Message----- > From: Frank Li <frank.li@xxxxxxx> > Sent: 2024年3月29日 22:15 > To: Hongxing Zhu <hongxing.zhu@xxxxxxx> > Cc: vkoul@xxxxxxxxxx; kishon@xxxxxxxxxx; robh+dt@xxxxxxxxxx; > krzysztof.kozlowski+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; > linux-phy@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > kernel@xxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx> > Subject: Re: [v1 0/3] Add i.MX8Q HSIO PHY driver support > > On Fri, Mar 29, 2024 at 04:09:47PM +0800, Richard Zhu wrote: > > v1 changes: > > - Rebase to the 6.9-rc1, and constify of_phandle_args in xlate. > > No other changes. > > Next time please send to imx@xxxxxxxxxxxxxxx instead of linux-imx@xxxxxxx. > > Frank Okay, thanks for your review. Best Regards Richard Zhu > > > > > i.MX8Q HSIO module has PHY and mix control regions. > > This patch-set adds i.MX8Q HSIO PHY driver support, and provides > > standard PHY phandles that can be used by i.MX8Q PCIe or SATA driver > > later. > > > > [PATCH v1 1/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding > > [PATCH v1 2/3] dt-bindings: phy: phy-imx8-pcie: Add binding for [PATCH > > v1 3/3] phy: freescale: imx8q-hsio: Add i.MX8Q HSIO PHY driver > > > > Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml | 143 > ++++++++++++++++++++++++ > > drivers/phy/freescale/Kconfig | 8 ++ > > drivers/phy/freescale/Makefile | 1 + > > drivers/phy/freescale/phy-fsl-imx8q-hsio.c | 518 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > ++++++++++++++++++++++++ > > include/dt-bindings/phy/phy-imx8-pcie.h | 26 +++++ > > 5 files changed, 696 insertions(+)
