[PATCH v2 2/7] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SuperSpeed signals originate from the DWC3 host controller and then
are routed through the Combo QMP PHY, where they are multiplexed with
the DisplayPort signals. Add corresponding OF graph link.

Reported-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 440bbb89bf8a..cfc07dd9d0ec 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3917,6 +3917,10 @@ port@0 {
 
 				port@1 {
 					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss_out>;
+					};
 				};
 
 				port@2 {
@@ -4195,8 +4199,24 @@ usb_1_dwc3: usb@a600000 {
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_1_dwc3_hs_out: endpoint {};
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs_out: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
 				};
 			};
 		};

-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux