> +&eqos { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_eqos>; > + phy-mode = "rgmii-id"; > + phy-handle = <ðphy0>; > + status = "okay"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy0: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; > + reset-assert-us = <1000>; > + reset-deassert-us = <10000>; > + qca,disable-smarteee; > + qca,disable-hibernation-mode; > + }; > + }; > +}; Thanks for removing the regulator. Reviewed-by: Andrew Lunn <andrew@xxxxxxx> Andrew