Tanix TX1 is a tiny TV box (60% of a credit card) with an Allwinner H313 SoC. This seems to be the same as the H616, just the "bad bin" version, limited to 1.3 GHz. The box has no Ethernet or SD card slot, which makes booting from it somewhat interesting: Pressing the hidden FEL button and using a USB-A to USB-A cable to upload code from a host PC is one way to run mainline. The box features a minimal set of peripherals: one USB port, 8 or 16GB of eMMC, an HDMI port and an (unsupported) SCI S9082H WiFi chip. Patch 1 adds the DT binding for the board compatible, I refrained from using the H313 name here, since it seems to be functionally identical to the H616. Patch 2 adds the devicetree. There is a blue and a red LED, both connected to the same GPIO pin, but with different polarities, so it's only either one of them enabled. I did not find a way to describe this in DT, so I omitted the red LED. Please have a look! Cheers, Andre Andre Przywara (2): dt-bindings: arm: sunxi: document Tanix TX1 name arm64: dts: allwinner: Add Tanix TX1 support .../devicetree/bindings/arm/sunxi.yaml | 5 + arch/arm64/boot/dts/allwinner/Makefile | 1 + .../dts/allwinner/sun50i-h313-tanix-tx1.dts | 184 ++++++++++++++++++ 3 files changed, 190 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts -- 2.35.8
