Define new regmap structure for Broadcast_AND region and initialize this regmap when HW block version is greater than 4.1, otherwise initialize as a NULL pointer for backwards compatibility. Switch from broadcast_OR to broadcast_AND region (when defined in DT) for checking status bit 1 as Broadcast_OR region checks only for bit 0. Signed-off-by: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx> --- drivers/soc/qcom/llcc-qcom.c | 14 +++++++++++++- include/linux/soc/qcom/llcc-qcom.h | 4 +++- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index cbef0dea1d5d..727d00c527f1 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -821,6 +821,7 @@ EXPORT_SYMBOL_GPL(llcc_slice_putd); static int llcc_update_act_ctrl(u32 sid, u32 act_ctrl_reg_val, u32 status) { + struct regmap *regmap; u32 act_ctrl_reg; u32 act_clear_reg; u32 status_reg; @@ -849,7 +850,8 @@ static int llcc_update_act_ctrl(u32 sid, return ret; if (drv_data->version >= LLCC_VERSION_4_1_0_0) { - ret = regmap_read_poll_timeout(drv_data->bcast_regmap, status_reg, + regmap = drv_data->bcast_and_regmap ?: drv_data->bcast_regmap; + ret = regmap_read_poll_timeout(regmap, status_reg, slice_status, (slice_status & ACT_COMPLETE), 0, LLCC_STATUS_READ_DELAY); if (ret) @@ -1284,6 +1286,16 @@ static int qcom_llcc_probe(struct platform_device *pdev) drv_data->version = version; + /* Applicable only when drv_data->version >= 4.1 */ + drv_data->bcast_and_regmap = qcom_llcc_init_mmio(pdev, i + 1, "llcc_broadcast_and_base"); + if (IS_ERR(drv_data->bcast_and_regmap)) { + ret = PTR_ERR(drv_data->bcast_and_regmap); + if (ret == -EINVAL) + drv_data->bcast_and_regmap = NULL; + else + goto err; + } + llcc_cfg = cfg->sct_data; sz = cfg->size; diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h index 1a886666bbb6..9e9f528b1370 100644 --- a/include/linux/soc/qcom/llcc-qcom.h +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -115,7 +115,8 @@ struct llcc_edac_reg_offset { /** * struct llcc_drv_data - Data associated with the llcc driver * @regmaps: regmaps associated with the llcc device - * @bcast_regmap: regmap associated with llcc broadcast offset + * @bcast_regmap: regmap associated with llcc broadcast OR offset + * @bcast_and_regmap: regmap associated with llcc broadcast AND offset * @cfg: pointer to the data structure for slice configuration * @edac_reg_offset: Offset of the LLCC EDAC registers * @lock: mutex associated with each slice @@ -129,6 +130,7 @@ struct llcc_edac_reg_offset { struct llcc_drv_data { struct regmap **regmaps; struct regmap *bcast_regmap; + struct regmap *bcast_and_regmap; const struct llcc_slice_config *cfg; const struct llcc_edac_reg_offset *edac_reg_offset; struct mutex lock; -- 2.25.1